MS45-200-1000 Metal Roofing Machine Forming Not Rust Not Scratch Long Life

Description

Normally, color steel coils and zinc-coated coils ( thickness: 0.3-0.8mm, strength: 235Mpa-345Mpa) is the first choice to make metal roofing sheets. 

Brand Forming Machinery Co., Ltd also has a power engineer team's ability to design for some roll forming machines special for such as material thickness＜0.3mm and yield strength G550Mpa.

Manufacturer Details For Reference

Machine Component	Specification
5Tons Manual Deocoiler	Coil Inner-diameter=510±30mm. Coil Outer-diameter Max. 1300mm；
	Taper wedge expanding the system
	Load Capacity: Max. 5 Tons; Coil Width Max. 1250mm

Machine Component	Specification
Steel Roof panel roll forming machine	Chain size: one inch with 18teeth;
	18 stations roll forming
	Shafts Diameter=ф80mm, Precision Machined, fine Polished
	Main motor =7.5KW, Frequency speed control
	Max Line speed of roll Former: Approx. 10-20m/min
Hydraulic Cutting Device	Stop to cut, Post cut
	Cutting tool material: Cr12Mov, Heat treatment
	Hydraulic unit, Pump motor =4KW
PLC Control System	Control the quantity & cutting length automatically
	Combined with: PLC (Siemens brand), Touch Screen (Siemens brand), Encoder (Omron), etc
	Cut-to-length tolerance≤±2mm
	24V Control voltage
	Controller with forward/backward/emergency stop buttons
	Un-powered, 3 units

If you need more detailed machine specifications for your inquiry, pls provide us the information as below:

Profile drawing of the roofing sheet

Other requirements such as hydraulic decoiler,  electric elements, etc.

Design Drawing