CE Standard Floor Decking Roll Forming Machine WIth 3T Decoiler
CE Standard Floor Decking Roll Forming Machine 380V 50HZ WIth 3T Decoiler
« Product Parameters
| NO. | ITEM | PARAMETER | NOTE | |
| 1. | Suitable material |
Type | Galvanized sheet | |
| Width(mm) | 1000mm | |||
| Thickness(mm) | 0.8-1.2mm | |||
| Yield stress(mm) | G550Mpa | |||
| Effective width | 750mm | |||
| 2. | Product specifications |
Detail as the attached file | ||
| Length | Any length | |||
| 3. | Power requirement |
Type | 380v/3ph/50hz | |
| Main Motor power | 15kw | |||
| Cutter power | 5.5kw | |||
| 4. | Forming speed(m/min) | 18-20 | Not include the time of cutting | |
| 5. | Manual Decoiler (Optional) |
Type | Manual | |
| Max capacity | 5t | |||
| Max Feeding width(MM) | 1000 | |||
| Suitable coil ID(MM) |
508mm±30mm | |||
| 6. | Forming Station | 24 | Depend on actual design | |
| 7. | Thickness of structure | 18mm A3 steel plate | ||
| 8. | Forming shaft diameter(mm) | 90 | ||
| 9. | Type of cutting | Hydraulic cutting | ||
| 10. | Control system | PLC and inverter | ||
« Work Follow
Decoiler→Feeding Guide Device→Roll Forming System→HydraulicPost Cutter→Exit Rack
« Profile Drawing
1) Manual Decoiler: one set
Un-powered,Manually control steel coil inner bore shrinkage and stop
Max Feeding width:1000mm,coil lID range 508mm±30mm
Capacity:Max.5 Ton
2) Feeding Guide Device
Feeding guide device can control the material feeding width
3)Main Machine
Rollers manufactured from 45# steel,CNC lathes,Heat Treatment,hard Chrome Coated,with thickness 0.04mm,surface witmirror treatment(for longer life and anti-rust)
The material for Embossing roller:bearing steel CCr15 for longworking life, heat treatment
4) Post Hydraulic Cutting Device
Post to cut, stop to cutting,Two pieces type of cutting blade design,no blanking
Hydraulic motor:5.5KW ;cutting pressure: O-12Mpa
Cutting tool material: Cr12MoV(= SKD11 with at least one milliontimes of cutting life),Heat treatment to HRC58-62 degree
The cutting power is provided by the main engine hydraulic station
5) PLC Control System
Control The Quantity And Cutting Length Automatically
Input The Production Data(Production Batch,pcs,Length,etc.)On TheTouch Screen
lt Can Finish The Production Automatically
Combined With: PLC, Inverter,Touch Screen, Encoder, etc
6) Exit Rack
Un-powered, Three units,with rollers on it for easymovement
7) Product Show
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.