Octagon Medium Sized Pellet Cooling System , No Cooling Dead Angle Counterflow Cooler

Octagon Design Medium-sized Feed Pellet Cooler With No Cooling Dead Angle

Counter-flow Feed Pellet Cooler Introduction

The adjustable diamond bulker is used to maximize the uniform accumulation of material in the tank. The reciprocating discharge mechanism of the slide valve is adopted, and the movement is stable and reliable, and the residue is small. Low energy consumption and easy operation. After cooling, the finished product temperature is not higher than room temperature +3 ° C ~ 5 ° C, suitable for the cooling of granular materials.

Desirable Characteristics of Counterflow Feed Pellet Cooler

● The counter flow cooling principle is adopted to cool the pellets with high temperature and moisture. Hot air touches hot pellets and cool air touches cool pellets so as to avoid the pellet surface crack caused by sudden cooling produced by direct touching between cool air and hot pellets.

● It adopts air-lock valve for feeding and ensures a large air inlet area, thus reaching an outstanding cooling effect.

● Special rotary product distributing mechanism results in even product distribution and more complete cooling.

● Also, with the up-to-date design of eight squared cooling box, it can cool the pellets without residue.

● Due to its slide valve reciprocation type discharge mechanism, it is featured by stable and reliable movement.

● Low power consumption, easy operation.

● It can reduce the temperature of pellets from 80~90℃to about 3~5℃ above ambient temperature, and the pellet moisture content is reduced from 17%~18% to 12%~13%, which is good for the pellet packing and storage,

Advantage:

•  Eight corner structure without residue
•  High temperature resistance of Inspection window
•  Direct type reducer, Motor with emergency stop
•  Simple structure, small volume, light weight, low thermal resistance, heat transfer area

•  The cooling time is adjusted by changing distance of level indicator.

Technical Parameters: