Long Operation Time Mini Thermal Imager Multi - Function With Video Recording
Long Operation Time Mini Thermal Imager Multi - Function With Video Recording
Nightseer 335C is a versatile security, surveillance and observation sensor for day and night-time use. The device is based on a ULIS GEN 2 high resolution uncooled thermal image. Lightweight and compact, Nightseer 335C is suitable for forwarding observation squads, search and rescue, infantry, border security and special units with varying levels of training.
Product Benefits
- Long Wave (8-14µ region)
- 35mm/50mm lens
- Thermal Imaging Zoom Continuous x1 to x4
- Video recording
- Up to 5 hours of battery life in typical use
| Technical Data Sheet | |
| NS335-C | |
| Microbolometer | |
| Type | Uncooled |
| Resolution, pixels | 384×288 |
| Frame Rate, Hz | 50 |
| Pixel size, um | 17 |
| Optical Characteristics | |
| Objective Lens | 35mm, F/1.1 |
| Magnification, X | 1 |
| Zoom | 2x/PIP/4x |
| Eye Relief, mm | 24mm |
| Dioptre Adjustment, D | / |
| FOV | 10.6°×8.0° |
| Close-up range,m | 5 |
| Display | |
| Type | OLED |
| Resolution, pixel | 1024×768 |
| Detection Range (1.7m target) | 1350 |
| Recognition Range (1.7m) | 450 |
| Detection Range (2.3m target) | 1800 |
| Recognition Range (2.3m) | 600 |
| Reticle | |
| Accuracy(per pixel) | / |
| Click range | / |
| Power Supply | |
| Battery Type | 2XCR123 |
| Power Supply | 3.6～7.2 |
| External Power Supply | 5v USB |
| Operation Time on a battery set(standard version),h | 5 |
| Video recorder | |
| Video/Photo format | avi/jpg |
| Built-in memory(optional) | 32G |
| Wifi Channel(optional) | |
| Frequency | 2.4 |
| Reception range,m | 15 |
| Physical Parameters | |
| Degree of Protection | IP67 |
| Operation Temperature | —25℃～+50℃ |
| Storage Temperature | —40℃～+70℃ |
| MTBF | More than 800h |
| Weight without batteries,g | 400 |
| Dimension, mm | 150×61×67 |
SALES & SERVICE
We understand that as a manufacturer it is important to work tightly with our distributors to support customers from different regions. We try our best to make sure all customers can get proper training of our device and good after-sell service when any kind of failure occurs.
QUALITY CONTROL
We understand that, in some cases, lives may depend on the performance of our products, that is why every unit that leaves our facility must pass tough quality control standards testing.
It is our mission to continue to design, build, test and ship the very best optoeletronics devices on the market.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.