IP67 Thermal Imaging Sight One Thumb Operated With Stadiametric Rangefinder
IP67 Thermal Imaging Sight One Thumb Operated With Stadiametric Rangefinder
Find the features that are right for you:
◆ Intelligent Coloration: Most thermal sights have one choice for black-hot/white hot commonly referred to as polarity. The NIGHTSEER has Intelligent coloration technology. Intelligent coloration allows the user to better bring out the target or the background depending on conditions.
◆ Ergonomic design with five-position thumbstick for one-hand operation
◆ Digital e-zoom: 1x, 2x and 4x
◆ Limited 3-year warranty
| Technical Data Sheet of Thermal Imager NightSeer 350 Series | |
| NS350-R | |
| Microbolometer | |
| Type | Uncooled |
| Resolution, pixels | 384×288 |
| Frame Rate, Hz | 50 |
| Pixel size, um | 17 |
| NETD | less than 50mk |
| Optical Characteristics | |
| Objective Lens | 50mm, F/1.1 |
| Magnification, X | 2.7 |
| Zoom | 2x/PIP/4X |
| Eye Relief, mm | 60mm |
| Dioptre Adjustment, D | ±5 |
| FOV | 7.4°×5.6° |
| Close-up range,m | 5 |
| Display | |
| Type | OLED |
| Resolution, pixel | 1024×768 |
| Detection Range (1.7m target) | 1800 |
| Recognition Range (1.7m) | 600 |
| Detection Range (2.3m target) | 2400 |
| Recognition Range (2.3m) | 800 |
| Reticle | |
| Accuracy(per pixel) | 0.43MOA |
| Click range(x,y) | 165 MOA |
| Power Supply | |
| Battery Type | 2XCR123 |
| Power Supply | 3.6～7.2 |
| External Power Supply | 5v USB |
| Operation Time on a battery set(standard version),h | 5 |
| Operation Time on external battery pack(standard version),h(13000mAh) | 44 |
| Video recorder (optional) | |
| Video/Photo format | avi/jpg |
| Built-in memory(optional) | 32G |
| Wifi Channel(optional) | |
| Frequency | 2.4 |
| Reception range,m | 15 |
| Physical Parameters | |
| Degree of Protection | IP67 |
| Operation Temperature | —25°C～+50°C |
| Storage Temperature | —40°C～+70°C |
| Shock and Vibration | 1000g/ms |
| MTBF | More than 800h |
| Weight without batteries,g | 415 |
| Dimension, mm | 193×65×67 |
SALES & SERVICE
We understand that as a manufacturer it is important to work tightly with our distributors to support customers from different regions. We try our best to make sure all customers can get proper training of our device and good after-sell service when any kind of failure occurs.
QUALITY CONTROL
We understand that, in some cases, lives may depend on the performance of our products, that is why every unit that leaves our facility must pass tough quality control standards testing.
It is our mission to continue to design, build, test and ship the very best optoelectronic devices on the market.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.