Replacement Custom Aluminum Parts Cast Aluminum Gas Buner / Gas Heater
Common Replacement Pressure Cast Aluminum Gas Buner & Gas Heater Ningbo China
Product Description
-
Common Replacement Gas Heater;
-
Construced with Pressure Cast Aluminum;
-
Application for Gas Grill Stove;
-
Heat Resistant;
-
Material:Cast Aluminum ADC12;
-
Hassel Free Installation;
-
Competitive Priced Gas Heater;
-
Gas Heater Head Size: 150mm;
-
Use it with Low or high Pressure Regulators.
Die Cast Aluminum Alloy ADC12
Common Replacement Pressure Cast Aluminum Gas Buner & Gas Heater Ningbo China
Chemical Composites:(%)
|
Silicon (Si): |
9.6-12.0 |
|
Iron(Fe): |
1.3 |
|
Copper(Cu): |
1.5-3.5 |
|
Managanese(Mn): |
0.5 |
|
Magnesium(Mg): |
0.3 |
|
Nickel(Ni): |
0.5 |
|
Zinc(Zn): |
1 |
|
Aluminum(Al): |
Remainder |
|
Resistance to Corrosion: |
3 |
|
Anodizing: |
3 |
(1 = most desirable, 5 = least desirable)
Aluminum Die Casting Processing
Common Replacement Pressure Cast Aluminum Gas Buner & Gas Heater Ningbo China
|
Siz Range |
Not normally over 2.7feet square |
|
Parts Weight |
0.01pounds to 14 pounds |
|
Setup Cost |
New die casting tooling is free |
|
Tolerances |
0.02inch,add0.01inch to 0.015inch across parting line up to part size |
|
Die Casting Finish |
32~63 RMS |
|
Minium Draft |
normally 1° |
|
Billet |
normally 0.04inch |
|
Normal Minimum Section Thickness |
0.060inch for small parts; 0.090inch for medium parts |
|
Ordering Quantity |
For first trial order: not less than 100pcs; Usually 1,000pcs or more. |
|
Normal Leadtime |
Tooling: 4~12 weeks update part size; Samples: one week if no finish and CNC machining required; Production:2~3weeks |
FAQ
Common Replacement Pressure Cast Aluminum Gas Buner & Gas Heater Ningbo China
1. Are you a trade company or factory?
We are a factory.
2. What can you do?
We can offer one stop solution on pressure die casting from tooling, casting, machining, finishing to packing.
3.How many years for your company estimated?
15years since 2004 established.
4. How about your prices?
Our prices are more competitive by all in house service.
How to custom Other Size Industrial Alumium Gas Heater?
- Customers send the IGS/STEP drawings or sample to us for offer;
- Will talk about the details to meet castabilities;
- After customer`s acceptance on our prices, we will send our 3D molding drawing for approval;
- After approving the 3D molding drawing, we will start the production of the tooling/mold after the deposit of mold/tooling cost paid;
- After mold/tooling finished, will send the samples for customer`s check;
- After samples approved, will prepare the production on trial order after customer`s payment for the balance for the mold/tooling cost.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.