Aluminum / Stainless Steel Casing Radar Sensor RS485 4 - 20mA KLD802
KLD802 80G FM Radar Level Sensor
Introduction
Radar level sensor antenna emits and narrow microwave pulse. This pulse propagates in space at the speed of light. When it encounters the surface of the measured medium, part of its energy is reflected back and received by the same antenna. The time interval between the transmitted pulse and the received pulse is proportional to the distance from the antenna to the surface of the measured medium.
Feature
·Based on the self-developed CMOS millimeter wave RF chip, it can achieve a more compact RF architecture, higher signal-to-noise ratio and smaller blind area.
5GHz working bandwidth enables the product to have higher measurement resolution and measurement accuracy.
·The narrowest 3 ° antenna beam angle, the interference in the installation environment has less impact on the instrument, and the installation is more convenient.
With shorter wavelength and better reflection characteristics on the solid surface, it is not necessary to use universal flange for aiming.
Support remote debugging and remote upgrade, reduce waiting time and improve work efficiency.
·Support Bluetooth debugging of mobile phones, convenient for on-site maintenance
|
KLD802
|
Medium: non-corrosive liquid, slightly corrosive liquid
Measuring range: 0.1m~10/20/30/60/100m Process connection: flange ≥ DN80 Process temperature: -40～110℃ Process pressure: -0.1～1.6MPa Antenna size: 32mm lens antenna Antenna material: PTFE Accuracy: ±1mm (range below 35m) ±5mm (range between 35m and 100m) Protection class: IP67 Center frequency: 80GHz Launch angle: 3° Power supply: two-wire /DC24V four-wire /DC12~24V four-wire /AC220V Casing: aluminum/sainless steel Signal output: two-wire /4...20mA/HART protocol four-wire / 4...20mA/ RS485 Modbus |
Installation
Installation Requirements
When installing the instrument, avoid installing it above the material inlet, and try to avoid various objects that affect the signal, such as stirring paddles, etc.
Under extremely complex working conditions, the instrument can work normally if there is no obstacle in the area with a radius of 20cm centered on the installation point.
Installation connection diagram:
The maximum installation spool height H max depends on the installation spool diameter D and the size of the product launch angle.
Too long installation connection will affect the radar performance.
Dimensions
Casing Dimension
Unit in mm:
Production:
Xi'an Kacise Optronics Tech Co., Ltd considers itself a solution provider and manufacturer. We offer maximum flexibility and a cost-optimised offer for our OEM customers.
What we could provide:
The range includes customized shell version/color, thread type(G-Thread/NPT Thread), Customized Software, prints, manual and catalog. If you are interested in installing at your side, Radar Module is available for sure.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.