KLD803 PTFE 34mm Lens Antenna Radar Level Gauge with 80GHz Frequency for Strong Corrosive Liquid Steam Foam

Price Negotiable
Price: 200-800
MOQ: 1PCS
Delivery Time: 5-8 work days
Brand: KACISE
Product Description
80G PTFE 34mm lens antenna Radar Level Gauge For strong corrosive liquid, steam, foam
Principle

KLD800 series 80G radar level gauge adopts frequency modulated continuous wave (FMCW) technology. The antenna emits a high-frequency FM radar signal, and the frequency of the radar signal increases linearly. The transmitted radar signal is received by the same antenna after being reflected by the measured medium. At the same time, the frequency difference between the transmitted signal frequency and the received signal frequency is proportional to the measured distance. The collected frequency difference signal is subjected to fast Fourier transform (FFT) to obtain the spectrum of the reflected echo, and the distance to the target to be measured is calculated based on this.

Feature
  • Millimeter wave radar, the measurement accuracy can reach up to ±2mm, and the minimum measurement blind zone is 0.05m.
  • The smaller antenna size satisfies the measurement of more working conditions.
  • A variety of lens antennas, smaller launch angles, more concentrated energy, stronger echo signals, and higher reliability than other radar products under the same industrial and mining conditions.
  • It has stronger penetration and can be used normally in the case of adhesion and condensation.
  • The dynamic signal range is larger, and the measurement of low dielectric constant media is more stable.
  • Multiple measurement modes, radar response in fast measurement mode
Product Dimension

Installation connection diagram:

Working Principle

The radar antenna transmites narrow microwave pulse which will be reflected back when reaching the surface of the medium tested and then received again by the antenna system. The signals shall be transmitted to the electric circuit and then converted into level signals. As the transmission speed of microwave is so fast, the time used for the microwave transmission to the surface of the medium tested and then reflected back is almost 0.

Technical Specification and Model Selections
Model KLD803
Medium strong corrosive liquid, steam, foam
Measuring range 0.1m~10/20/30/60/100m
Process connection flange ≥ DN50
Process temperature -40~130℃
Process pressure -0.1~2.5 MPa
Antenna size 34mm lens antenna (according to flange size)
Antenna material PTFE
Accuracy ±1mm (range below 35m) ±5mm (range between 35m and 100m)
Protection class P67
Center frequency 80GHz
Launch angle
Power supply Two-wire /DC24V / four-wire /DC12~24V / four-wire /AC220V
Casing aluminum/stainless steel
Signal output two-wire /4...20mA/HART protocol four-wire / 4...20mA/ RS485 Modbus
Installation Requirements

When installing the instrument, avoid installing it above the material inlet, and try to avoid various objects that affect the signal, such as stirring paddles, etc.

Connection

Lens Antenna Diameter

Φ32mm

lens Antenna

Φ42mm

lens Antenna

Φ76mm

lens Antenna

Φ74.7mm

lens Antenna with air purge

Beam Angle

Get in Touch

Have questions about our products or want to discuss a custom order? Our team is ready to help you.

Company Xi'an Kacise Optronics Co.,Ltd.
Location 2nd Building, Tianyuan International Mansion, High-tech Zone, Xi'an City, Shaanxi Province, China
Contact Person Evelyn Wang

Request A Quote

Please check your email address.
Your message must be at least 20 characters.