KTG153 Dew Point Meter for Dew Point Sensors in the Food Industry

KTG153 Dew Point Meter for Dew Point Sensors in the Food Industry

Introduction

The KTG153 dew point meter adopts an imported polymer-material capacitive-resistive dew point sensor, which features a fast response speed and high sensitivity. It is easy to operate. This meter can measure the trace moisture content in various gases and is suitable for all kinds of online analysis scenarios with strict requirements for moisture content control.

Application Areas

Petrochemical industry, natural gas, industrial gases, semiconductor industry, drying industry, food industry, power industry, machinery manufacturing, air separation industry, pharmaceutical industry.

Instrument Features

Imported polymer-material capacitive-resistive dew point sensor, with rapid response and high sensitivity.

Adopts electronic flow control, without any clogging issues.

Equipped with a 128×64 liquid crystal display and a full Chinese operation menu, which is simple and convenient.

Automatically stores measurement data. The length of the recording interval can be freely set, and the recorded data can be displayed in the form of curves or lists for easy browsing.

Alarm points can be set arbitrarily, with audible and visual alarm output.

Alarm points and upper and lower control points can be set arbitrarily within the full measurement range.

Standard RS232 or RS485 communication ports, enabling two-way communication with computers.

Technical Parameters

Measurement range: -80.0℃～+20.0℃; -100.0℃～+20.0℃

Maximum allowable error: ±1.5℃ (above -60℃); ±2.0℃ (below -60℃)

Repeatability: ±1.5℃

Preheating time: ≤5min

Sample gas flow rate: (2500～3000)mL/min

Sample gas pressure: 0.05MPa≤inlet pressure≤0.50MPa

Resolution: 0.1℃

Output signal: Optional (4～20)mA or (0～10)mA

Contact capacity: 220VAC, 1A; 24VDC, 2A

Working power supply: (220±22)VAC, (50±5)Hz

Working environment: Temperature: -15℃～＋45℃; Humidity: ≤90%RH