The KTG142 infrared analyzer (portable) is used in metallurgy

Application Areas

This analyzer can be used in power plants, metallurgy, cement, fertilizer, chemical industry, environmental protection, scientific research and other fields.

Instrument Characteristics

• It adopts imported infrared sensors, which have a long service life, high sensitivity, fast response speed, high reliability, good stability and selectivity.
• It comes with a precision filter, which greatly prolongs the service life of the sensor.
• It has a full - Chinese man - machine dialogue menu, which is intuitive and convenient to operate.
• It adopts a 128×64 dot - matrix LCD liquid - crystal display, which can simultaneously display parameters such as the content of the measured gas, date, time and the internal temperature of the instrument.
• It has a timing automatic storage function, which allows users to view the stored data and curves at any time.
• It is equipped with a high - power battery, which ensures that the instrument can work continuously for more than 20 hours after a single charge.
• The alarm point can be set arbitrarily within the full range.

Technical Parameters

Measuring range: (The detection component and range are selected when placing an order.)

Maximum allowable error: ±1.5%FS.

Stability: Zero - point drift: ±1%FS/7d; Range drift: ±1%FS/7d.

Sample gas flow rate: (400±20)mL/min.

Response time: τ90≤20S (when the gas directly passes through the gas chamber).

Sample gas pressure: 0.05MPa≤inlet pressure≤0.25MPa.

Working environment: Temperature: - 10℃～＋45℃; Humidity: ≤90%RH.

Working power supply: The rechargeable battery carried by the instrument.

Charging power supply: (220±22)VAC, (50±5)Hz, and the charger has a built - in charging protection function.

Weight: About 1.5Kg.