KAN100 Catalytic Combustion Type Combustible Gas Detector with Ex db IIC T6 Gb IP66 Protection and ABUS Four-Wire Bus
KAN100 Point-type Combustible Gas Detector for Industrial and Commercial Applications
Product Introduction
The housing is made of cast aluminum alloy, which has the advantages of low density, high strength, good corrosion resistance and excellent casting processability. Embedded technology and highly sensitive anti-poisoning gas sensors are adopted to maintain a constant alarm sensitivity. Submergence protection: intelligent over-range protection circuit. It has the function of adapting to both two-wire and four-wire bus systems. In the four-wire working mode, it is connected to the gas alarm controller in a conventional way. In the two-wire mode, it is connected to the bus output terminals of the gas alarm controller.
Product Description
| Detection Principle and Gas | Detection Range and Sampling Method | Operating Voltage and Power Consumption | Communication Distance |
| Catalytic combustion type: Methane, Propane, Isobutane, Hydrogen | Diffusion type 3 - 100% LEL | DC24V ± 6V Normal power consumption ≤ 1.5W (DC24V) Alarm power consumption ≤ 3W (DC24V) |
Two - wire bus ≤ 500m (RVSP2.5mm²) Four - wire bus ≤ 1000m (RVSP1.5mm²) |
| Electrical Interface | Explosion - proof Mark and Protection Level | Output Capacity | Communication Method |
| G1/2" internal thread | Ex db IIC T6 Gb IP66 | 1 set of passive switch output 220VAC/24VDC, 2A 1 set of audible and visual alarm output |
ABUS four - wire bus TBUS two - wire bus (communication adaptive) |
| Alarm Value | Operating Temperature and Humidity | Display Method | Specification |
| 25% LEL - 50% LEL (factory - set value) | -40°C - +70°C ≤ 93% RH | Three - color (red, green, yellow) lights for working status display | Cast aluminum ≤ 1.2Kg 195×140×94 |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.