KAN103 Explosion-proof Combustible Gas Detector with Multi-sensor Compatibility and RS485 LoRa Communication
The detector is compatible with various types of gas sensors, including catalytic, infrared, semiconductor, and electrochemical sensors. The housing is designed with a thickened explosion-proof aluminum alloy, ensuring long-term and stable operation in all kinds of industrial explosion-proof environments.
It is an all-round detector that allows for switching between 2/3/4-wire systems, RS485, and LoRa communication by replacing plug-and-play modules. The detector comes with a switch output (passive relay output). You can adjust the output setting to follow a specific mode through parameter configuration. Additionally, it is equipped with a drive output for an audible and visual alarm (24V DC).
| Operating Voltage and Power Consumption | Detection Range | Detection Principle | Communication Distance |
| DC24V ± 6V, ≤ 1.5W (DC24V) | Diffusion type | Catalytic combustion, Electrochemical, Infrared, PID | ≤ 1000m (RVSP1.5mm²) |
| Electrical Interface | Explosion - proof Mark and Protection Level | Output Capacity | Communication and Operation Modes |
| G3/4" internal thread | Ex db IIC T6 Gb : Ex db IIIC T80°C Db IP66 | 1 set of passive switch output: 220VAC/24VDC, 2A 1 set of active audible and visual alarm output |
Infrared remote control within ≤ 8 meters 4 - 20mA three - wire communication, ABUS four - wire system TBUS two - wire system, RS485, LoRa communication |
| Alarm Value | Operating Temperature and Humidity | Display Method | Pressure Range and Response Time |
| Specific parameters of different sensors are shown on the nameplate | -40°C - +70°C, ≤ 93%RH | Three - light status display | 86KPa - 106KPa < 30S (T90) |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.