KMPI-Emicrofluidic chip electrochemiluminescence detector

Product Introduction

KMPI-Emicrofluidic chip electrochemiluminescence detector is simplified equipment, which MPI-B multi-parameter chemiluminescence test system to remove flow injection sampler. It can be applied electrochemical detection based on microfluidic chip analysis, chemiluminescence detection and combination of microfluidic chip and electrochemiluminescence analysis, etc. This instrument equipped with large space to install all kinds of microfluidic chip, easy and convenient operation.  

Technical Features

1. Multi-function chemiluminescence detector

* Photomultiplier tube high pressure: -100 ~ -1000V

* Signal detection stability: 0.05%

* Profit increase: 1×, 10×, 100× 1000×

* Filter frequency: 10 Hz, 20 Hz, 50 Hz and 100 Hz

* Output drift: 0.5 mV or less

* Input impedance: 100 mΩ or higher

* Integral amplifier integral time: 0.01 ~ 10 s

* Sampling rate: 1 ~ 200 T/S

2. Electrochemical analyzer

* Potential scope: -10V ~ 10V

* Tank pressure: ± 12V

* Current scope: 250 mA

* Reference electrode input impedance: > 1012 Ω

* Input offset current: < 50 pA

* Current measurement resolution: < 1 pA

* The potential increment: 0.1 mV

* Scan rate: 0.001 ~ 70 V/S

* Measuring method: cyclic voltammetry (CV), linear sweep voltammetry (LSV), chronoamperometry (CA),

chronocoulometry (CC) and bulk electrolysis with coulometry (BE), open circuit potential-time (OCPT)

3. Microfluidic chip multiplex high-voltage power supply

* Output road: 4

* Output voltage: 0 ~ 2000 V/road

* Output current: 0 ~ 2 mA/road

* Step to run the program: 10 steps

4. MPI-A/B Multi-function chemiluminescence detector

* Wavelength range: 300 ~ 650 nm