Integrated Air Quality Sensor KGD-AM-1 with Real-time VOC and PM Detection for Compact Ultra-Thin Design and Full Metal Shielding
Integrated Air Quality Sensor KGD-AM-1 for Fresh Air Systems
Product Introduction
The integrated air quality sensor KGD-AM-1 is a cost-effective integrated module of multi-parameter air quality sensors. It can measure and output the concentration of VOCs, as well as the mass concentrations of PM1.0, PM2.5, and PM10 particulate matters in real time. With stable performance, compact design, complete functions, and rich interfaces, it can be widely applied to high-end air purifiers, fresh air systems (fresh air blowers), air conditioners with purification functions, air quality detectors, and the supporting facilities of consumer electronics.
Product Features
- The minimum resolvable particle size is 0.3μm.
- Real-time output of dust and VOCs, with high precision. Digital display is the preferred option.
- High sensitivity and rapid response.
- Full metal shielding, providing good anti-interference ability.
- Ultra-thin design.
Technical Parameters
| Detection Range | Dust: 0 - 1000 μg/m³; VOC: 0 - 10ppm |
|---|---|
| Detection Accuracy | PM1.0/PM2.5: ≤ 100 μg/m³: ± 10 μg/m³ > 100 μg/m³: ± 10% of the reading PM10: ≤ 100 μg/m³: ± 20 μg/m³ > 100 μg/m³: ± 20% of the reading (Referenced to Gold Sample*, under environmental conditions of 25 ± 2°C, 50 ± 10%RH) VOC: 0 - 1ppm: ± 0.25ppm 1 - 10ppm: ± 25% of the reading |
| Operating Conditions | -10 - 50°C, 5 - 95%RH |
| Storage Conditions | -20 - 60°C, 0 - 95%RH (Non - condensing) |
| Operating Voltage | DC 5V ± 0.2V, ripple < 100mV |
| Operating Current | ≤ 100mA |
| Stand - by Current | ≤ 200μA (When the SET pin is set to low - level sleep) |
| Communication Interface | UART: TTL |
| Product Dimensions | W48H40D12 mm |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.