Continuous Ammonia Emissions Monitoring System with TDLAS Technology, 0.01ppm Resolution, and Heated Gas Path for Accurate NH₃ - CEMS

Continuous Monitoring System for Ammonia Emissions from Exhaust Gases of Stationary Pollution Sources (NH₃ - CEMS) KGD - YQ - 523

Product Introduction

The Continuous Monitoring System for Ammonia Emissions from Exhaust Gases of Stationary Pollution Sources (NH₃ - CEMS) KGD - YQ - 523 adopts Tunable Diode Laser Absorption Spectroscopy (TDLAS) technology and is suitable for online monitoring of ammonia concentration at the outlet of the denitrification process. The system uses a near - extraction method, with the measurement unit installed outside the flue wall. The gas - path channel in contact with the sample gas is heated throughout the process to avoid ammonia adsorption and loss, ensuring the authenticity of the sample gas. It can accurately reflect the changes in ammonia slip in real - time, providing reliable data support for environmental protection monitoring.

Product Features

• Adopting TDLAS technology, the measured gas is not affected by cross - interference from background gases.
• Ultra - low range measurement. Using a multi - reflection gas cell, it has a low detection limit.
• The system uses a full - process calibration method to improve the accuracy of measurement results.
• The gas flow path is heated throughout the process, and low - adsorption materials and processing techniques are used to effectively avoid NH₃ condensation loss.
• Extraction - type measurement, not affected by fluctuations in dust, temperature, and pressure inside the flue.
• Equipped with a full - process calibration function.

Technical Parameters