KLD70 Series Microwave Radar Sensor with 4-20mA / HART Output and 6-30m Measuring Range for High Temperature Applications
KLD70 series microwave radar sensor module of Level Meter
We also produce 6G radar level meter and 26G HF radar level meter.
Introduction
KLD70 series microwave radar sensor module of Level Meter is suitable for liquid, paste, granule and block material level and non-contact measurement, suitable for changes in temperature, pressure big; there is an inert gas and volatile. The measurement method of microwave pulse, can work normally in the industrial frequency band range. The beam energy is low, can be installed on all kinds of metal, non-metallic container or pipe, no harm to human body and environment
Operation Principle
High-frequency microwave pulses issued by the guided wave radar propagate along detection components (steel cable or steel rod), met the media to be measured, since the dielectric constant of the mutation, cause reflections, a portion of the pulse energy is reflected back. Transmit pulse and the reflected pulse is proportional to the distance and the time interval measured media.
Features of guided wave radar
- As a result of advanced microprocessor and unique echo processing technology, microwave radar sensor module of Level Meter can be used in a variety of complex conditions.
- Because of the type of process connections and detection components, making KLD70 series microwave radar sensor module of Level Meter is suitable for a variety of complex conditions and applications. Such as: high temperature, high pressure and low dielectric constant media.
- Pulsed work, microwave radar sensor module of Level Meter instruments transmit power is very low, can be installed in a variety of metals, non-metallic container, no harm to humans and the environment.
Parameters
|
KLD701 |
|
|
|
Suitable for Medium: Liquid, solid powder Application: Liquid and solid powder measure, complicated process conditions Explosion-proof Grade: Exia IIC T6 Ga/Exd ia IIC T6 Gb Measuring Range: 30m Frequency: 500MHz-1.8GHz Antenna: Single cable or single rod antenna Accuracy: ±10mm Process Temperature:( -40~250)℃ Process pressure:( -0.1~4)MPa Signal output:( 4~20)mA/HART The Scene Display: Four LCD/Can be programmed Power Source: Two-wire (DC24V) Four-wire(DC24V/AC220V) Shell: Aluminum /Plastic Connection: Flange (optional) / Thread |
|
KLD702 |
|
|
|
Suitable for Medium: Liquid with high corrosive Application: Acids, bases or other corrosive media Explosion-proof Grade: Exia IIC T6 Ga/Exd ia IIC T6 Gb Measuring Range:20m Frequency: 500MHz-1.8GHz Antenna: Full PTFE sealing cable type or rod antenna Accuracy:±10mm Process Temperature:( -40~200)℃ Process pressure:( -0.1~4)MPa Signal output: (4~20)mA/HART The Scene Display: Four LCD/Can be programmed Power Source: Two-wire (DC24V) Four-wire(DC24V/AC220V) Shell: Aluminum /Plastic Connection: Flange (optional) / Thread |
|
KLD703 |
|
|
|
Suitable for Medium: Solid powder Application: Cement silo powder measure; Ash powder measure Explosion-proof Grade: Exia IIC T6 Ga/Exd ia IIC T6 Gb Measuring Range:30m Frequency: 500MHz-1.8GHz Antenna: Double cable type antenna Accuracy:±10mm Process Temperature:( -40~150)℃ Process pressure:( -0.1~4)MPa Signal output: (4~20)mA/HART The Scene Display: Four LCD/Can be programmed Power Source: Two-wire (DC24V) Four-wire(DC24V/AC220V) Shell: Aluminum /Plastic Connection: Flange (optional) / Thread |
|
KLD704 |
|
|
|
Suitable for Medium: Liquids, particularly low dielectric constant liquid Application: Measuring deionized water,deoxygenated water and other liquids Explosion-proof Grade: Exia IIC T6 Ga/Exd ia IIC T6 Gb Measuring Range:6m Frequency: 500MHz-1.8GHz Antenna: Coaxial tube type antenna Accuracy:±5mm Process Temperature:( -40~250)℃ Process pressure:( -0.1~4)MPa Signal output: (4~20)mA/HART The Scene Display: Four LCD/Can be programmed Power Source: Two-wire (DC24V) Four-wire(DC24V/AC220V) Shell: Aluminum /Plastic Connection: Thread / Flange (optional) |
|
KLD705 |
|
|
|
|
Production Flow
Packaging & Shipping
Cases
Certificates
Our Services
- Your inquiry will be replied in 24hours.
- Well-trained and experienced staffs to answer all your enquires in fluent English.
- OEM&ODM, we can help you to design and your request will be put into product.
- Distributorship are offered for your unique design and some our current models.
- Protection of your sales area, ideas of design and all your private information.
- Discounts are offered based on order quantities.
- We provide paid repair services for meter damages not arising from manufacturing quality issues or meter damages not within the scope of warranty.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.