26Ghz Acid Water Tank Radar Liquid Level Sensor Water Level Sensor
Introduction
Radar Level Gauge is a liquid (material) level recording instrument in the measurement.
The microwave pulse is sent by the antenna,and then is reflected by the material surface , then is received by the radar systems.
Then is sent to the electronic circuit, the microprocessor can identify the microwave pulse echo regenerate the material or the surface of the liquid.
The correct signal is done by intelligent software, up to millimeter accuracy, nonapplicable harsh environments.
What's the Specification Our Radar Level Sensor?
1. Small antenna size, easy to install; Non-contact radar, no wear, no pollution.
2. Almost no corrosion, bubble effect; almost not affected by water vapor in the atmosphere, the temperature and pressure changes.
3. Serious dust environment on the high level meter work has little effect.
4. A shorter wavelength, the reflection of solid surface inclination is better.
5. Beam angle is small, the energy is concentrated, can enhance the ability of echo and to avoid interference.
6. The measuring range is smaller, for a measurement will yield good results.
7. High signal-to-noise ratio, the level fluctuation state can obtain better performance.
8. High frequency, measurement of solid and low dielectric constant of the best choice.
Parameters
|
KLD2602 |
|
|
|
Application:Anti-high temperature, Anti-high pressure Liquid, Mildly corrosive liquid Measuring Range:30 meters Process Connection: Thread, Flange Medium Temperature: -40℃ ~ 250℃ Process Pressure: -0.1 ~ 4.0 MPa Accuracy: ± 3mm Protection Grade: IP67 Frequency Range: 26GHz Explosion-proof Grade:Exia ⅡC T6 Ga/ Exd ia IIC T6 Gb Signal Output:4~ 20mA/HART (Two-wire / Four) RS485/ Modbus
|
Application of radar level sensor
success cases for radar level sensor
KLD series 26G High Frequency Radar Level Meter Other Series
|
KLD2601 |
|
|
|
Application: All kinds of corrosive liquid Measuring Range:10 meters Process Connection: Thread, Flange Medium Temperature: -40℃ ~ 130℃ Process Pressure: -0.1~0.3 MPa Accuracy: ± 5mm Protection Grade: IP67 Frequency Range: 26GHz Signal Output:4~ 20mA/HART (Two-wire / Four) RS485/ Modbus Explosion-proof Grade:Exia ⅡC T6 Ga/ Exd ia IIC T6 Gb
|
|
KLD2603 |
|
|
|
Application:Solid material, Strong dust Easy to crystallize, condensation occasion Measuring Range:70 meters Process Connection: Universal Flange Medium Temperature: -40℃ ~ 250℃ Process Pressure: -0.1 ~ 0.1 MPa Accuracy: ± 15mm Protection Grade: IP67 Frequency Range: 26GHz Signal Output:4~ 20mA/HART (Two-wire / Four) RS485/ Modbus Explosion-proof Grade:Exia ⅡC T6 Ga/ Exd ia IIC T6 Gb
|
|
KLD2604 |
|
|
|
Application:Solid material, Strong dust, easy to crystallize, condensation occasion Measuring Range:80 meters Process Connection: Universal Flange Medium Temperature: -40℃ ~ 250℃ Process Pressure: -0.1 ~ 0.1 MPa Accuracy: ± 15mm Protection Grade: IP67 Frequency Range: 26GHz Signal Output:4~ 20mA/HART (Two-wire / Four) RS485/ Modbus Explosion-proof Grade:Exia ⅡC T6 Ga/ Exd ia IIC T6 Gb
|
|
KLD2605 |
|
|
|
Application:Solid material, Strong dust, easy to crystallize, condensation occasion Measuring Range:80 meters Process Connection: Universal Flange Medium Temperature: -40℃ ~ 250℃ Process Pressure: -0.1 ~ 0.1 MPa Accuracy: ± 15mm Protection Grade: IP67 Frequency Range: 26GHz Signal Output:4~ 20mA/HART (Two-wire / Four) RS485/ Modbus Explosion-proof Grade:Exia ⅡC T6 Ga/ Exd ia IIC T6 Gb
|
|
KLD2606 |
|
|
|
Application:Solid particles, Powder Corrosive medium container Measuring Range:20 meters Process Connection:Liquid 30m/Solid 20m/powder 15m Medium Temperature:-40℃ ~ 250℃ Process Pressure: -0.1 ~ 4.0MPa (Flat Flange) -0.1 ~ 0.1MPa (Universal Flange)
Accuracy:± 10mm Protection Grade:IP67 Frequency Range:26GHz Power Supply: Two-wire (DC24V) / Four-wire (DC24V/AC220V) Signal Output:4... 20mA/HART (Two-wire / Four) RS485/ Modbus Explosion-proof Grade:Exia ⅡC T6 Ga/ Exd ia IIC T6 Gb
|
- Your inquiry will be replied in 24hours.
- Well-trained and experienced staffs to answer all your enquires in fluent English.
- OEM&ODM, we can help you to design and your request will be put into product.
- Distributorship are offered for your unique design and some our current models.
- Protection of your sales area, ideas of design and all your private information.
- Discounts are offered based on order quantities.
- We provide paid repair services for meter damages not arising from manufacturing quality issues or meter damages not within the scope of warranty.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.