Hygienic Sanitary Flow Meter , Vegetable Oil / Milk Food Grade Flow Meter
Sanitary Hygienic Type Food Grade Vegetable Oil / Milk / Beer Flow Meter
Introduction
The KUF2000 series ultrasonic water flow meter is a reliable solution designed for long-term field measurements. It offers flexibility with three types of sensors to measure pipe flow: clamp on type, insertion type, and inline pipe type. Additionally, this flow meter can measure heat when equipped with a temperature sensor, providing comprehensive data for various applications. An optional SD card feature allows for the storage of large quantities of data, ensuring efficient monitoring and analysis.
Clamp On Type: This sensor type clamps onto the outside of pipes without direct contact with the internal liquid. All models can function as energy meters when connected to temperature sensors. The KUF2000 Series Clamp On Ultrasonic Flowmeter ensures easy installation without the need to cut off the pipe or interrupt water flow, making it suitable for long-term online measurements. It can accurately measure a wide range of liquid flows with the sensor clamped onto the pipe.
Insertion Type: Requiring only two installation holes on the pipe, insertion type sensors are easy to install. The hole-making tool facilitates a no-stop-flow installation. These sensors come in direct contact with the fluid, ensuring stable and reliable measurements.
Inline Pipe Type: For DN15-32mm pipes, the π shape inline pipe sensor is utilized, while DN40 and above use standard inline pipe sensors. Inline sensors offer advantages such as a low starting flow rate, high measurement accuracy, and no pressure loss, making them suitable for various applications.
Parameters
|
Host part |
Principle |
Ultrasonic time gap |
|
Accuracy |
±1% |
|
|
Display |
2×20 character LCD with backlight |
|
|
Signal output |
1 way 4~ 20mA output, electric resistance 0~ 1K,accuracy0. 1% |
|
|
1 way OCT pulse output( Pulse width 6 ~ 1 0 0 0 ms,default is 2 0 0 ms) |
||
|
1 way Relay output |
||
|
Signal input |
3 way 4~ 20mA input, accuracy 0. 1%,acquisition signal such as temperature, press and liquid level |
|
|
Connect the temperature transducer Pt100, can finish the heat/energy measurement |
||
|
Data interface |
Insulate RS485 serial interface, upgrade the flow meter software by computer, support the MODBUS, METER-BUS etc. |
|
|
Cable |
Twisted-pair cable, generally, the length under 50 meters; Select the RS485 communication. The transmission distance can over 1000m. |
|
|
Pipe Condition |
Pipe material |
Steel, Stainless steel, Cast iron, Copper, Cement pipe, PVC, Aluminum, Glass steel product, liner is allowed. |
|
Pipe Diameter |
DN15~6000mm |
|
|
Straight length pipe |
Transducer installation should be satisfied: upstream10D, downstream 5D, 30D from the pump. |
|
|
Medium |
Type of Liquid |
Water, sea water, waste water, oil, chemicals (alcohol, acids, etc.), plant effluent and other liquids |
|
Temperature |
-30~160°C |
|
|
Turbidity |
10000pm not so much bubbles |
|
|
Flow speed |
0~±10m/s |
|
|
Environment |
Temperature |
Host: -20~60°C; Sensor: -30~160°C |
|
Humidity |
Host: 85%RH; Flow sensor: IP68, less than 2m under water |
|
|
Power supply |
DC8~36V or AC85~265V or Battery |
|
|
Consumption |
1.5W |
|
Sensor Selection
Optional Temp. sensor
Optional Host
Ordering Infomation
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.