Sea Water Resistant Negative Pressure Resistant Electromagnetic Flow Meter with High Pressure (16MPa)
Sea water Electromagnetic Flow Transmitter Meter Negative Pressure Resistant Electromagnetic Flowmeter Flow Meter
Introduction
KEF series electromagnetic flow meters are intended for fluid measurement in most industries including Electromagnetic flow meters are widely used in industrial sectors such as chemical industry, environmental protection, metallurgy, pharmaceutical, paper making, water supply and removal etc.Besides measuring flow of general conductive liquid electromagnetic flow meter can measure flow of liquid-solid mixed fluid, high-viscosity fluid and salt, strong acid and strong alkali.Electromagnetic flow meter can realize local indication and output electrical current signal of 4-20mA which can be used to record, adjust and control.There are two basic components of electromagnetic flow meter: 1) The Detector, which includes the flow tube, isolating liner and measuring electrodes, and 2) The Converter, which is the electronic device responsilbe for signal processing, flow calculation, display and output signals.The materials of construction of the wetted parts( liner and electrodes) should be appropriate for the specification on the intended type of of service. Revies of the compatibilities consistent with the shipment of each meter.
Features
1. LCD back light display with high clearness. (Option: LED back light display)
2. No intercepting fluid parts, no pressure loss and fluid clogging.
3. No mechanical inertia, quick response and good stability, application in automatic examination, adjustment & controlling.
4. Measuring accuracy not influenced by physical parameters such as style, temperature, viscosity, density and pressure.
6. Supply many styles of flow meters such as inline type and insertion type, etc.
Adopt EEPROM memory to measure operation data, safe and reliable protection of memory.
7. Integral type flow meters and remote type flow meters.
8. Simple structures, firm, no movable parts and long operation life.(Guarantee in 1 years)
Parameters
| Items | Description | |
| Suitable Diameter | DN25~DN2600 (below DN25 non-standard) | |
| Suitable Fluid | Liquid with conductive ratio more than 5 μs/cm | |
| Measuring Range | 0.5~10m/s (extendable to 15m/s) | |
| Upper Limit of Span | 0.5~10m/s. 1~5m/s recommended | |
| Accuracy | 0.3% (Option), 0.5%, 1.0% of F.S.. | |
| Repeatability | Below 0.25% | |
| Display of Converter |
Display : Flow rate ( 4-digits), Totalizer (9-digits), Velocity, Alarm status by LCD ( LED-option) |
|
| Scale unit: selectable of L/h, L/m, L/s, m3/h, m3/m, m3/s | ||
| Flow direction : selectable by program | ||
| 3 Digits display below of decimal points. | ||
| K-factor: 5 digits. | ||
| Data logger for 2-3years. | ||
| Programming language: English, Korean(on request) | ||
| Mounting: Integral type; Remote Type | ||
| Power | AC: 220V, 50-60Hz; DC: +24V(Option) | |
| Output Signals |
4~20m ADC, load ≤ 750ohm, 0~3kHz, 5V with source and changeable width. High terminal and effective frequency output Voltage output:0-5 V DC |
|
| Conduit connection | M20 * 1.5 Thread | |
| Communication Interface | RS-232; RS-485; HART | |
| Operation Pressure | 1.0MPa, 1.6MPa, 4.0MPa, 16MPa (Special) | |
| Fluid Temperature | -20°C~80°C, 80°C ~130°C, 130°C ~180°C Depending on Lining Material | |
| Ambient Temperature | Sensor -40°C ~80°C. transducer -15°C ~50°C | |
| Ambient Humidity | ≤ 85%RH (at 20C) | |
| Cable Outlet Size | M20×1.5 | |
| Power Supply | 220VAC±10%, 50-60Hz±1Hz, 24VDC±10%, Battery power (3-5years) | |
| Power Consumption | ≤ 8W | |
| Protection Ratings | Integral type: IP65. Remote type: sensor IP68, transducer IP65. | |
| Materials | Electrode |
316L (stainless steel), Hastelloy C, Hastelloy B, Titanium, Tantalum, etc. |
| Liner | PTFE, Soft rubber, Hard rubber, F46, FS, PUR. | |
| Measuring tube | SUS 304 | |
| Flange | Carbone Steal | |
| Ground ring | 316L (stainless steel), HC, Ti, Ta, Cu. | |
| Connection of Flange |
National Standard GB9119-88 (DIN2051, BS4504), JIS, ANSI. Screw. Tri-clamp for sanitary application Insertion type. |
|
| EX-proof protection | Exde ib ii BT2 | |
| Quality control | ISO9001-2008, CE | |
Model selection
Application
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.