Externally Mounted Fluid Level Meter with 10mm Accuracy and IP67 Protection for Oil and Gas Storage Tanks
External liquid lever sensor with sonar ranging principle, using the temperature integrate sensor to process the sonar signal. the sensor is pasted in the outerwall of the tank. Using the patented algorithm to calculate the height of the liquid in the tank and output to a remote control system(eg.DCS) through (4-20)mA,HART, RS-485, Modbus.
According the figure right, the time is taken for the signal to be transmitted and then received from the liquid surface. Signals from the transducer are fed into the processor and then processed by patented algorithm to calculate the height of the liquid according to the formula:
- Place of Origin
- Shaanxi, China (Mainland)
- Brand Name
- Kacise
- Model Number
- KXEUL01
- Usage
- Level Sensor
- Theory
- Ultrasonic Sensor
- Output
- (4-20)mA,HART, RS-485, Modbus
- Repeatability error
- ±5mm
- Power
- 24V DC±5%(two-wire system )
- External material
- cast aluminum
- Ingress Protection
- IP67
- Explosion-proof Mark
- ExdmIICT6
- Sites Applicable
- all explosive gas atmosphere except coal mine
- Ambient temperature for operation panel
- -40°F~+140°F
- Ambient temeprature for ultrasonic probe
- -40°F~+212°F
- Measurable tank wall thickness
- max 70mm
Supply Ability: 300 Piece/Pieces per Month
Packaging Details
1 set in 1 carton with size 770*290*200(mm) or 600*290*200 (mm)
Port
Lian yungang/Shanghai/Tianjin or other port as customer requests
- Non destructive installation — No drilling on tank wall.
- Just attach probe on tank with magnetic sucker, glue or supporter.
- No welding and no disturbance in tank normal use, expecially applicable for the tanks with toxic, strong corrosive, alkali liquid inside.
- Installation does not disturb normal use of tank.
- No special requirement for medium and tank material.
- Explosion proof.
- Applicable in various complicated conditions.
- Self adjustment technology to make sure stable performance
- Auto calibration.
- Strong anti-interference capability.
What can the advanced technology Non Destructive Installation give you?
It is SAFE CONVENIENT and COST SAVING. You do not have to care if there is high pressure, toxic, or strong corrosive liquid in tank.
| Repeatability error | 2mm |
| Measurable tank wall thickness | Max 50mm |
| Tank Material | Steel, Stainless steel, glass, unfoamed plastics and other compact materials. |
| Measurable medium | Pure liquid, milky liquid, suspension liquid |
| Ambient temperature: | -4℉~140℉( the max temperature for High temperature type is 302℉) |
| Ambient humidity | 15%~100%RH |
| Power: | DC 24V 0.05A |
| Signal output: | Relay output |
| Relay capacity | DC 30V 6A / AC 250V 6A |
| Diameter of threading hole | Φ8mm ( adaptive cable diameter Φ6~8mm ) |
| Shell Material | Cast Aluminum |
| Shell Ingress Protection | IP65 |
| Explosion-proof | ExdmIICT6 |
| Sites applicable | Explosive gas atmosphere except coal mine |
| Sensor( probe ) shell material | Stainless steel Sensor( probe ) shell material: Stainless steel |
| Standard connector | G1/2 |
Our liquid level control/switch has very good application for oil or hazardous chemicals.
Medium already applied in:
| Liquefied Gas | Ethylene | Hydrochloric Acid | Nitric Acid | Sulfuric Acid |
|---|---|---|---|---|
| Propylene | Aqua Carbolisata | Edible Oil | Crude Oil | Lacquer Thinner |
| Brine | Butadiene | Chlorethylene | Light Hydrocarbon | Caustic Soda Liquid |
| Diesel | Light Oil | Gasoline | C3 | |
| Kerosene | Xylol | Oxalic Acid | Oxirane | Ethanol |
| Carbinol |
Applicable for varous types of tanks, such as sperical tank, stand tank and horizontal tank.
So WHY is our liquid level control/switch is your best choice instead of traditional level control/switch?
Let's see the comparison of our level switch and the traditional one:
| Our level switch | Traditional level switch | |
|---|---|---|
| Installation |
No drilling. Convenient and safe. |
Drilling is required. Inconvenient. |
|
Repair, maintenance, or replacement for a new level meter |
No any disturbance in tank normal use. |
Users should release all the liquid in tank and clean it.Therefore, the tank can not be used for days which will result in work delay and great loss. |
Conclusion: Our liquid level contro/ switch has the absolutely distinguished and competitive advantages in level control especially for the control of hazardous liquid ( toxic, strong corrosive, acid.....) in high pressure and hermetically sealed tank.
- Individual packing
- Product is packed between two sponges.
- Size: 600mm*110mm*290mm
- Gross Weight: Approx 10kg (weight varies according to length of probe cable)
Xi'an Kacise is certified by ISO 9001-2008, GJB 9001B-2009, CE, intrinsic safety explosion-proof and isolated safety explosion-proof, etc. which assure our products are conform to the international standards.
We have been specializing in manufacturing pressure, level and flow measuring instruments and related products for 10 years. We have experienced technical and management personnel, through the efforts of our entire staff, we have become a professional measuring instrument manufacturer and solution provider. And we are continuously trying to improve product quality.
Currently, Kacise sensor is already exported to America, Spain, Australia, Chile and 20 other countries and regions, and received many favorable feedbacks. Our overseas distributers are also increasing. We regards “reasonable prices, efficient production time and good after-sales service” as our tenet, and hope to cooperate with more customers for mutual development.
We supply high quality Turbine Flow Meter, hope we can coopperate in near future by providing you suitable products, good services and reasonable prices.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.