Double High Impedance Online PH Sensor Immersion Mounting

KPH310 Online PH Sensor Signal Output: RS-485 Double High Impedance Differential Amplifier Ip68

Introduction

pH sensor is a sensor used to detect the concentration of hydrogen ions in the measured substance and convert it into the corresponding available output signal.

feature

1. Fast cable connector, waterproof function, avoid cable twisting phenomenon during installation;

2. Long life, good performance in toxic ion aqueous solution;

3. A variety of installation methods, easy to assemble;

4. Strong resistance to chemical corrosion, integral seal, eliminate leakage phenomenon.

1.Application Environment

For environmental water quality monitoring, acid/alkali/salt solution, chemical reaction process, industrial production process, can meet the majority of industrial applications on-line pH measurement requirements.

2.Feature

• Signal Output: RS-485(Modbus/RTU protocol).
• Convenient to connect to PLC, DCS, Industrial Control Computer, General Controller, paperless recording instrument or touch screen and other third-party equipment.
• Double high impedance Differential amplifier, strong anti-interference, fast response.
• The patented pH probe, with an internal reference fluid at a pressure of at least 100 kpa (1 bar), oozes extremely slowly from the microporous salt bridge, with a forward exudation lasting more than 20 months. Such a reference system is very stable, electrode life than ordinary industrial electrode times longer.
• Easy to install: submerged installation.
• Ip68, protection level.

3.Technical Specifications

4.Dimensional Drawing

Tips:Q&A

1.What is pH?

pH is a measure of how acidic/basic water is. The range goes from 0 to 14, with 7 being neutral. pHs of less than 7 indicate acidity, whereas a pH of greater than 7 indicates a base. The pH of water is a very important measurement concerning water quality.

2.What does ppm stand for in pools?

parts per million

By Steve Donohoe. As pool service guys, we use the term parts per million several times a day when checking the chemical parameters of a swimming pool. It's the unit of measure that we use for chlorine, alkalinity, salt, TDS, cyanuric acid, and so on.

3.Is pH 10 Water Safe?

There has been no evidence of harm found in drinking water with a pH of between 7 and 8.5. (Interesting to note: The pH of human blood is a little on the basic side, 7.365.) When the PH of water becomes greater than 8.5, water taste can become more bitter.