Fine Mist Ultrasonic Atomation Textiles Coating Nozzles Spraying
Fine Mist Ultrasonic Atomation Textiles Coating Nozzles
Description:
The wide nozzle ultrasonic atomizing nozzle uses low-pressure air/gas to produce a uniform wide spray belt, which can be up to 150mm wide in spray width, and is suitable for sector area spraying.
Structure:
The nozzle body is made of titanium material, which has outstanding acoustic properties, high tensile strength, and excellent corrosion resistance. The protective casing is made of 304 stainless steel (titanium can also be chosen)
Parameters:
| Model | FSW-5006-L |
| Name | 50Khz Wide Ultrasonic Nozzle Atomization |
| Frequency | 50Khz |
| Atomized particle size range(μm) | 15-40 |
| Spray width(mm) | 50-100 |
| Spray flow(ml/min) | 1-25 |
| Spray height(mm) | 50-300 |
| Liquid viscosity (cps) | <30 |
| Particle size (μm) | <10 |
| Diversion pressure (Mpa) | <0.1 |
| Application | Suitable for large-area spraying, such as glass coating, etc |
Advantages:
1. Uniform coating: Uniformity>95
2. Saving raw materials: The utilization rate of raw materials is over 85%, which is 4 times higher than traditional two fluid spraying
3. High precision in coating thickness control: can prepare coatings ranging from 20nm to tens of micrometers, with precise control of coating thickness
4. The atomized particles are uniform, and the spray flow is extremely low
5. It can be sprayed intermittently or continuously
6. Will not block the nozzle
7. Anti corrosion nozzle
8. High precision and controllable spraying
Fine Mist Ultrasonic Atomation Textiles Coating Nozzles
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.