60 Khz Embedding Head Ultrasonic Coil Inlays For Contactkess Connecting System
High Frequency 60Khz Embedding Head Ultrasonic Coil Inlays for Contactkess Connecting System
Ultrasonic IC card welding device:
60KHZ ultrasonic intelligent IC smart card welding machine
in the production of Bank card, smart card and VIP, which need to dip tin coils and then welding.
Ultrasonic embedding device, also known as smart card antenna welding machine, smart card spot welding machine, smart card antenna implanting machine, etc., is a professional equipment for smart card embedding. It is applied to sheet welding positioning and antenna embedding. One of the important applications in the field of ID smart cards. Hangzhou Qianrong Automation Equipment Co., Ltd. is a national high-tech enterprise specializing in the manufacture and research of ultrasonic equipment. It has many years of experience in ultrasonic welding applications and can provide solutions for the buried welding of various ID smart cards.
ultrasonic welder can welding wire directly, the welding spot has the following benefits:
1. welding spot firm, prevent to cold Weld.
2. same size welding spot, consistency.
3.welding spot small, easy to press fit package.
4. eliminating the need for pre-welded solder dip process, can hire less one operations staff.
5. its welding is faster than iron.
6. the production process will not produce exhaust gas waste pollution.
7. 60KHz ultrasonic unit, speed welding, low production costs.
Ultrasonic IC smart card welding equipment can be made into one generator to drive 5 to 10 sets welding heads, which will easy for you to use.
Specifications:
| Type | QR-W60A |
| Frequency(KHz) | 60KHz |
| Trigger | External control or manual control |
| welder head | wear-resisting alloy steel above HRC55° |
| Threading hole | Φ0.m or Φ0.5mm |
| Power code | 2M or 5M |
| Generator |
Digital generator V6.6 or analog generator ZJS-100 |
| Generator Size |
280*320*140mm(V6.6) 280*320*150mm(ZJS-100) |
| Cover dimension | Φ25X100mm |
| Cover material | Nylon or aluminum |
| Cooling way | compressed air cooling (Φ4mm conduit) |
| Speed | 0.1-0./s |
| Thread fixed cycle | length 60000 m/s |
Competitive Advantage:
- Steady welding point, completely eradicate insufficient solder technically.
- The size of welding spots is the same, equality line, good effect on uniformity.
- The welding spot is small, wouldn’t increase the weight of the coil, easy to do lamination and encapsulation.
- To leave out the immersion tin step before doing welding, save an operator.
- After skilled in welding, much faster than the way to use searing iron to do weld.
- On the process on manufactory, there is no waste gas, waste rubbish on pollution, runs in quiet and no noise.
- To select the frequency 60KHz, one machine could drive 5-10 ultrasonic products, the speed to do welding is much faster.
- Low power consumption, to save production cost for manufactory enterprise.
High Frequency 60Khz Embedding Head Ultrasonic Coil Inlays for Contactkess Connecting System
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.