Industrial Vacuum Ultrasonic Industrial Cleaner High Power Machine For Diesel Fuel Injectors
The hydrocarbon vacuum automatic ultrasonic cleaning machine is a next-generation industrial cleaning solution designed for precision degreasing, oil removal, and drying of complex metal and non-metal parts. By combining ultrasonic cavitation, hydrocarbon solvent technology, vacuum cleaning, and steam bath drying, this system delivers superior cleaning performance, high efficiency, and eco-friendly operation.
It is especially effective for copper and aluminum stamping, drawing, and machining parts, as well as components with slots, blind holes, and deep cavities.
- Excellent Cleaning Effect
- Hydrocarbon solvents provide stronger oil removal than water-based or halogenated solvents.
- Vacuum cleaning and steam bath ensure not only spotless surfaces but also fast, complete drying.
- Solves the challenges of cleaning large copper/aluminum components and precision parts.
- Wide Material Compatibility
- Free from chlorine, sulfur, and corrosive substances.
- Safe for metals, plastics, and rubber--no swelling, dissolution, or brittleness.
- Provides anti-rust protection for ferrous parts.
- Ultra-Low Toxicity & Safety
- Hydrocarbon cleaning agents are non-carcinogenic and ultra-low toxicity (inhalation, oral, skin contact).
- Completely volatilizes at room or elevated temperatures with no residue.
- Vacuum sealed chamber + explosion-proof design + fire suppression = maximum operator safety.
- Cost-Effective Operation
- Low power consumption: ~10KW/h average vs. 40% less than traditional water-based equipment.
- Integrated distillation recovery system: 99% recovery rate, unlimited solvent reuse, only 0.8L/h average loss.
- Environmental Protection
- Hydrocarbon solvents degrade naturally.
- Waste liquid can be safely incinerated (producing only CO₂ + water).
- Zero ozone-depleting substances; fully eco-friendly process.
- Vacuum + high-temperature ultrasonic cleaning for maximum degreasing effect.
- Flexible tank configuration - first and second tanks can include swinging, rolling, or rotating devices.
- Distillation recovery unit - enables solvent recycling and zero discharge cleaning.
- Closed chamber structure - ensures minimal solvent loss.
- PLC automation - fully automatic, real-time monitored cleaning process.
- Customizable design - non-standard models available with tailored drawings and cleaning programs.
- Automotive industry - engine blocks, gears, bearings, injectors, and aluminum/copper parts.
- Metalworking & hardware - stamping, drawing, and machining parts with blind holes or slots.
- Aerospace & precision engineering - high-precision alloy and deep-hole components.
- Electronics & medical - parts requiring clean, dry, and residue-free surfaces.
We use high-quality electrical and mechanical components to ensure stable and reliable performance. Our machines are designed by highly experienced engineers who have previously developed equipment for leading international manufacturing companies. In addition, our production team consists of skilled workers with many years of experience in building automated cleaning lines. Our quality control system covers the entire process, from raw material inspection to final machine assembly and testing.
We have worked with numerous well-known manufacturing enterprises and government projects, accumulating extensive project implementation experience. In addition, we have many years of international experience in machine installation, commissioning, and on-site testing overseas. We are committed to providing comprehensive and reliable after-sales support and services to ensure long-term customer satisfaction after purchase.
We can accept flexible payment terms due to different situations like 10~20% payment after installation and test service. We also need some support from you in some cases.
We will provide installation and test service for automatic cleaning lines at your facility until cleaning is working properly. And we offer 5 years with 24/7 work during warranty period.
The company can professionally customize various types of cleaning machines to provide customers with cost-effective cleaning solutions to meet your one-stop procurement services.
- Water-containing process: dehydration - rough washing - vacuum fine washing - vacuum bath - vacuum drying
- Oil-containing process: rough washing - vacuum fine washing - vacuum bath - vacuum drying
| Six tank hydrocarbon vacuum automatic ultrasonic cleaning machine | |
| Inner slot size: | L600*W600*H500MM (effective size) |
| Inner slot material: | SUS304 thickness:10.0MM |
| External plate quality | SUS304 thickness:1.0MM |
| The first vacuum ultrasonic cleaning tank: | ultrasonic power: 3KW installation of vibration plate ultrasonic frequency: 28KHz one ultrasonic generator adjustable time, adjustable temperature installation of throwing system heating power 12KW installation of filter circulation system: 1 set |
| The second vacuum ultrasonic cleaning tank: | ultrasonic power: 5.4KW installed vibration plate ultrasonic frequency: 28KHz two ultrasonic generators heating power 12KW adjustable time, adjustable temperature install a filter circulation system:1set install the throwing system Install a conductivity meter |
| The third vacuum ultrasonic cleaning tank: | ultrasonic power: 5.4KW installed vibration plate ultrasonic frequency: 28KHz two ultrasonic generators heating power: 12KW adjustable time, adjustable temperature install a filter circulation system:1set install the throwing system Install a conductivity meter |
| The fourth vacuum ultrasonic cleaning tank: | ultrasonic power: 3KW installed vibration plate ultrasonic frequency: 28KHz one ultrasonic generator heating power: 12KW adjustable time, adjustable temperature install a filter circulation system:1set install the throwing system Install a conductivity meter |
| The fifth tank steam bath: | steam bath, heating power 27KW, with filter circulation system. |
| The sixth tank vacuum drying: | heating power: 15KW |
| Machine: | equipped with 8 cleaning baskets, using conveyor belt loading and unloading. |
| Industry | The cleaning products and materials | Clear dirt |
|---|---|---|
| Semi-conductor | Integrated circuit, power tube, silicon wafer, diode, lead frame, capillary, tray, etc. | Hards, etching oil, polishing wax, dust particles, etc. |
| Electrical & electronic machine | Tube parts, cathode ray tube, printed circuit board, quartz parts, electronic components, telephone switching equipment, speaker components, power meter, LCD glass, core iron parts, computer floppy disk, video parts, head, photo die mask, etc. | Fingerprint, powder, cutting oil, stamping oil, iron filings, polishing materials, walnut powder, polishing wax, resin, dust, etc. |
| Precision machine | Bearing, sewing machine parts, typewriter, textile, machine, optical-mechanical device, gas valve, watches cameras, metal filter | Machine cutting oil, iron filings, polishing powder, fingerprint, oil, grease, dirt, etc. |
| Optical device | Glasses, lens, prism, optical lens, filter lens, glass device, film, optical fiber, etc. | Plastic resin, paraffin, fingerprinting, etc. |
| Hardware & machinery parts | Bearing, gear, ball, metal shaft parts, tools, adjustable valve and cylinder parts, burner, compressors, hydraulic press, gun and ultracentrifuge, city water faucet, etc | Cutting oil, iron filings, grease, polishing powder, fingerprint and so on. |
| Medical instrument | Medical instrument, denture, etc. | Iron filings., Polishing powder, oil, stamping oil, dirt, etc. |
| Electroplate | Galvanized parts, mold, stamping parts, etc. | Polishing scrap iron, oil, black iron shell, rust, oxidation shell, scrap iron, polishing powder, stamping oil, dirt, etc. |
| Car parts | Piston ring, carburetor, flow meter housing, compressor shell, electrical components, etc. | Iron filings, polishing powder, oil stamping oil, dirt, etc. |
| Chemical fiber | Chemical or artificial fiber nozzle filter protector chemical fiber texture, etc. | The Chemical colloid, glue, and other solid material. dust. Etc. |
GongDong Blue Whale Clean is a professional Ultrasonic Cleaner manufacturer with 20 years of history in GongDong, China. Our products are updated and upgraded every year.
With 20+ years of experience and a self-owned factory, Whale Cleen is a trusted manufacturer of advanced ultrasonic cleaning equipment. We provide:
- Factory-direct pricing and high customization flexibility.
- One-stop service - from design and production to installation and after-sales.
- Strong safety and environmental compliance for global industries.
- Long-term support - professional engineering team, training, and lifetime technical service.
Email: michael@bwhalesonic.com
Website: https://www.whaleultrasonic.com/
If you are interested in this product and want to know more details, please contact us online or email to us, we will have professional sales team service for you. Thank you for your time.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.