40khz Ultrasonic Jewelry Cleaning Machine 22L 600W Heat Power
22L 600W Heat Power Ultrasonic Jewelry Cleaner For Jewelry Makers
How Do Whale Cleen Sonic Ultrasonic Jewelry Cleaners Work?
Ultrasonic cleaning reaches into small cracks and crevices and lifts dirt, grime, and oil away. The machines produce micro-bubbles by creating bursts of positive and negative waves in the water. The pressure from the waves causes the bubbles to grow, and once the bubbles reach a certain size, they collapse. When the bubble collapses, energy releases from it. When the bubble collides with the jewelry, the power is released, knocking the debris loose. It is a combination of heat, pressure, and force that work together to clean out the nooks and crevices. Once the machine stops, and the solution stops moving, the grime will settle, and the oils will float on top.
Detail Information Of Z-S08:
| Specifications for ultrasonic cleaner Z-S08 | |
| Model | Z-S08 |
| Tank capacity | 22L |
| Tank size | 500×300×150mm |
| Tank material | SUS304 |
| Ultrasonic power | 400W |
| Heating power | 600W |
| Timer | 1-30mins adjustable |
| Heater | 0-80c adjustable |
| Frequency | 40khz |
| Control | Digital Control |
| Voltage | Single Phase:100~140V,200~240V |
| Warranty | 1 year |
| Packing | 1unit/Carton Box |
Cleaning Effect:
How to Take Care Your Ultrasonic Jewelry Cleaner Machine
Your ultrasonic jewelry cleaning machine will be with you for a long time if you take good care of it. When using your ultrasonic cleaner, avoid getting the base wet or immersed in water. Water at the base will damage the electrical circuit of even the ultrasonic jewelry cleaner.
Also, ensure that the cleaning pot is properly set onto the base – this also means aligning the two plugs properly to plug the pot into the base for power to the ultrasonic generators.
In addition, avoid cleaning diamonds, emeralds, and certain gemstones in your ultrasonic jewelry cleaner. While this will damage these gemstones, it will also affect the efficiency of your ultrasonic cleaner.
To avoid any doubt as to what you can and cannot clean with your ultrasonic cleaner, read the instructions and label to ensure that your cleaner is safe for use on certain jewelry.
Frequently Asked Questions About Ultrasonic Jewelry Cleaner Machine
Is it really safe for emeralds, diamonds, and opals?
As a rule, stones that are brittle will be damaged when used in even the best ultrasonic jewelry machine. Emerald, tanzanite, onyx, lapis lazuli, turquoise, and opal are all examples of stones that cannot be cleaned with ultrasonic cleaners. That is because these gemstones are damaged easily when subjected to ultrasonic waves. Also, these kinds of gemstones which are usually treated using heat and other methods to bring out their color are easier to ruin. Also be careful not to place synthetic or fake gemstones in your ultrasonic cleaner.
Can I clean my pearls and sterling silver, is it safe?
No! It is not a good idea to try to clean pearls, sterling silver or similar jewelry with an ultrasonic machine. These are not stones and are easily ruined or damaged. You can, however, use a soft damp cloth to clean them if you must.
Can I take the tank off this unit?
Not all ultrasonic machines are designed with moveable tanks. Those that are removable are equipped with a plastic basket that can be moved.
Can I clean my greasy glasses with it?
Certainly! You can get rid of all grease and grime from your glasses, especially from the nose guards which carry most grime build up. It’s a good idea to use distilled water or recommended cleaning solutions.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.