22L Ultrasonic Engine Cleaner , 40KHz Industrial Ultrasonic Bath
22L Ultrasonic Engine Cleaner 40KHz Industrial Ultrasonic Bath
Ultrasonic Cleaner Maintenance Tips:
You’ll get better performance from you ultrasonic engine cleaner by following these recommendations:
-
Skim off the oil that comes to the surface of the solution and set it aside.
-
Dirty solutions extend cleaning time. Drain the tank into a container and along with the skimmed oil dispose of it following local regulations.
-
Thoroughly clean the tank following the instruction manual.
-
Remember to degas fresh cleaning solutions.
Specification:
| Model | z-10 |
| Ultrasonic Frequency | 40,000 Hz |
| Tank Material | Stainless Steel SUS304 |
| Tank Capacity | 22 L |
| Timer | 1-30minutes ,Digital timer |
| Power Supply | AC 100 ~ 120V, 50 / 60Hz AC 220 ~ 240V, 50 / 60 Hz |
| Ultrasonic Power |
480W |
| Heating Power | 600 W , Digital Heating |
| Unit Size | 550×330×270mm ( L x W x H ) |
| Tank Size | 500×300×150 mm ( L x W x H ) |
| Package Size | 670×460×790(2pcs)mm ( L x W x H ) |
| N.W. | 13 kg |
| G.W. |
14 kg |
Specification Of Related Model:
If this model is not suitable for you, please check other in below chart.
| Model | Tank size | Unit size | Volume | Actual ultrasonic power | Rated ultrasonic power | Ultrasonic frequency | Heating power | Timer | Heating temperature |
| LxWxH(mm) | LxWxH(mm) | (L) | (W) | (W) | (kHz) | (W) | (MIN) | (℃) | |
| Z-008 | 150x85x65 | 175x110x125 | 0.8 | 30 | 30 | 40 | no | 1-30 | no |
| Z-01 | 150x135×100 | 175x160x210 | 2 | 50 | 60 | 40 | 150 | 1-30 | 0-80 |
| Z-02 | 240x135x100 | 265x165x220 | 3.2 | 100 | 120 | 150 | |||
| Z-03 | 300x150x100 | 325x180x225 | 4.5 | 150 | 180 | 300 | |||
| Z-031 | 300x150x150 | 325x180x280 | 6.5 | 150 | 180 | 300 | |||
| Z-040 | 300x240x150 | 325x265x280 | 10.8 | 200 | 240 | 450 | |||
| Z-06 | 330x300x150 | 360x325x285 | 15 | 300 | 360 | 450 | |||
| Z-08 | 500x300x150 | 530x325×285 | 22 | 400 | 480 | 600 | |||
| Z-10 | 500x300x200 | 530x325x325 | 30 | 500 | 600 | 600 |
Cleaning Effect:
Why does ultrasonic fuel injectors work so well?
Ultrasonic fuel injector cleaning gets into the tiniest of nooks and crannies where dirt and grime hide to scrub those areas clean. The cavitating and de-cavitating cleaning action of the ultrasonic cleaning system goes where brush bristles can’t. It has proven to do what powerful cleaning solutions by themselves just cannot do.
This form of fuel injector cleaning can only work if the ability exists to open and close the injectors while the fuel injectors are suspended inside the ultrasonic cleaning bath. If you cannot open and close the fuel injectors whilst inside the ultrasonic fuel injector cleaning bath you will not achieve your goal of cleaning the inside of the fuel injectors. Both cleaning liquids and the ultrasonic frequency sound waves has to be able to get to the components you want to clean.
Only one in about ten thousand fuel injectors needs to be replaced. It then can be understood why ultrasonic fuel injector cleaning is a cheaper alternative to buying new injectors.
The cost of injector cleaning is negligible compare to the cost of fixing a damaged engine due to fuel injector related problems.
Why take a chance do it right the first time out.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.