40KW-75KW Waste Paper Pulp Molding Machine/Egg Tray Machine With Aluminum Molds
| Attribute | Value |
|---|---|
| Voltage | 380V/50HZ |
| Warranty | 1 year |
| After sale Service | Engineers available to overseas installation |
| Product Type | Egg Tray Machine |
| Raw material | Waste Paper |
| Keyword | egg tray machine, egg tray production line, egg carton machine |
The Paper Egg Tray Machine includes pulp making system, forming system and drying system.
- Put the raw material and water into the hydraulic pulper, you will get the paper pulp after mixed 10-20 minutes.
- Pulp pump will transfer the finished paper pulp into the slurry pool.
- The pulp pond beater will mix the pulp concentration.
- The pulp pump will transfer the pulp into forming machine.
- The molding machine absorbs the pulp to the molding mold through the suction of the vacuum system to absorb the excess water into the gas-water separation tank, then pumps the water to the tank for storage.
- The molding mold absorbs the pulp and forms it, then the transfer mold takes out the finished product and sends it to the drying tray inside the dryer oven.
Heat source: natural gas, diesel, liquefied petroleum gas and other combustion liquids and gases. The transmission mode adopts industrial transmission chain to drive the net plate transmission, which runs in the drying line.
| Parameter | Value | Notes |
|---|---|---|
| Egg Tray mould quantity | 3pcs | Container Required |
| Raw material | Waste paper | About 40ft*1(without dryer) |
| Output for egg tray | 1000pcs/hour | |
| Net weight per piece (gram) | 70g-75g | |
| The volume of waste paper consumed | 0.075ton / hour | |
| The volume of water consumed | 0.22ton / hour | |
| The natural gas consumption of the dryer(about) | 45cbm/h | |
| Machine Weight | 8tons | |
| Egg tray Size | 295mm*295mm 30eggs |
Remark: 1. Usually, all installation and debugging work will be done before shipment. 2. If the buyer wants to Install the debugging term, the seller will arrange one people instructs the installment (all travel ticket and hotel charge by buyer and engineer charge USD100/day)
| Main parts | Quantity | Picture |
|---|---|---|
|
Pulping system Including: mill pulp pump -1set, water pump-2sets, pulp pump -2sets, 1M³ pulping machine -1sets |
1set |  |
|
Forming system Including: 3 moulds forming machine -1set, Vacuum pump-1set, Compressor -1set, Washer -1set, Vacuum tank-1pcs, Air tank --1pcs |
1set |  |
The warranty period: 1 year Guarantee for the maintenance and repairment of the forming machine exclude the parts of quick-wear. The spare parts will be provided according to the client requirement.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.