Vibrating Industrial Fluidized Bed Dryer For Drying Wet Beads Granules Pieces Flakes Slice

FAQ: Before consider to use industrial fluid bed dryers, we should consider the following things of the raw material that you are going to dry: 

1- material name 

2. material shape and size

3. initial moisture

4. final required moisture 

5. drying temperature and heating source

6. site space and conditions

Principle:
Material from the inlet into the machine, under the action of vibration, the material is thrown forward continuous movement in the horizontal direction, the hot air through the fluidized bed with wet material heat exchange, wet air by cyclone separator after dedusting by the exhaust outlet, drying materials from the discharge port.

Industrial fluid bed dryers Characteristics:
Vibration source is the use of vibration motor drive, smooth operation, easy maintenance, low noise, long life, easy maintenance. High thermal efficiency, than the general drying device can save more than 30%.
Bed temperature distribution uniformity, no local overheating phenomenon, fluidization symmetry, no dead angle phenomenon.
Good adjustability, adaptable to wide. The thickness of the material layer and the moving speed in the machine and the full amplitude change evenly can achieve stepless adjustment.
The material surface damage is small, can be used for the drying of fragile materials, and the irregular material particles do not affect the work effect.
The fully enclosed structure is used to effectively prevent the cleaning of the air-fork infection between the material and atmosphere. When used for high-moisture material mass production, multi-series can be used to meet user requirements (typical materials: such as polyacrylamide, etc.)

Technical Parameter

* The above is the largest evaporation.