1.0A 50 - 600V Super Fast Recovery Diode SMB Fast Recovery Diode Module
Surface Mount Ultrafast Power Rectifiers 1.0A 50-600V ultra fast recovery rectifier SMB fast recovery diode module
Ideally suited for high voltage, high frequency rectification, or as free wheeling and protection diodes in surface mount applications where compact size and weight are critical to the system.
ULTRAFAST RECTIFIERS 1.0 AMPERE, 50−600 VOLTS
Features:
- Small Compact Surface Mountable Package with J−Bend Leads
- Rectangular Package for Automated Handling
- High Temperature Glass Passivated Junction
- Low Forward Voltage Drop (0.71 to 1.05 V Max @ 1.0 A, TJ = 150°C)
- Pb−Free Packages are Available
Mechanical Characteristics:
- Case: Epoxy, Molded
- Weight: 95 mg (Approximately)
- Finish: All External Surfaces Corrosion Resistant and Terminal Leads are Readily Solderable
- Lead and Mounting Surface Temperature for Soldering Purposes: 260°C Max. for 10 Seconds
- Polarity: Polarity Band Indicates Cathode Lead
MAXIMUM RATINGS
| Rating | MURS | |||||||
| Symbol | 105T3 | 110T3 | 115T3 | 120T3 | 140T3 | 160T3 | Unit | |
| Peak Repetitive Reverse Voltage | VRRM | 50 | 100 | 150 | 200 | 400 | 600 | V |
| Working Peak Reverse Voltage | VRWM | 50 | 100 | 150 | 200 | 400 | 600 | |
| DC Blocking Voltage | VR | 50 | 100 | 150 | 200 | 400 | 600 | |
| Average Rectified Forward Current | IF(AV) |
1.0 @ TL = 155°C 2.0 @ TL = 145°C |
1.0 @ TL = 150°C 2.0 @ TL = 125°C |
A | ||||
| Non−Repetitive Peak Surge Current, (Surge applied at rated load conditions halfwave, single phase, 60 Hz) | IFSM | 40 | 35 | A | ||||
| Operating Junction Temperature | TJ | -65 to +175 | °C | |||||
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability.
THERMAL CHARACTERISTICS
| Rating | MURS | ||||||||
| Symbol | 105T3 | 110T3 | 115T3 | 120T3 | 140T3 | 160T3 | Unit | ||
| Thermal Resistance, Junction−to−Lead(TL = 25°C) | RqJL | 13 | °C/W | ||||||
ELECTRICAL CHARACTERISTICS
| Maximum Instantaneous Forward Voltage (Note 1) | vF | 0.875 | 1.25 | V | |
| (iF = 1.0 A, TJ = 25°C) | |||||
| (iF = 1.0 A, TJ = 150°C) | 0.71 | 1.05 | |||
| Maximum Instantaneous Reverse Current (Note 1)(Rated DC Voltage, TJ = 25°C) | iR | 2.0 | 5.0 | mA | |
| (Rated DC Voltage, TJ = 150°C) | 50 | 150 | |||
| Maximum Reverse Recovery Time | trr | 35 | 75 | ns | |
| (iF = 1.0 A, di/dt = 50 A/ms) | |||||
| (iF = 0.5 A, iR = 1.0 A, IR to 0.25 A) | 25 | 50 | |||
| Maximum Forward Recovery Time (iF = 1.0 A, di/dt = 100 A/ms, Rec. to 1.0 V) |
tfr | 25 | 50 | ns | |
1. Pulse Test: Pulse Width = 300 ms, Duty Cycle v 2.0%.
DEVICE MARKING AND ORDERING INFORMATION:2500 Units / Tape & Reel
| Device | Marking | Package | ||
| MURS105T3 | U1A | SMB | ||
| MURS105T3G | SMB(Pb−Free) | |||
| MURS110T3 | U1B | SMB | ||
| MURS110T3G | SMB(Pb−Free) | |||
| MURS115T3 | U1C | SMB | ||
| MURS115T3G | SMB(Pb−Free) | |||
| MURS120T3 | U1D | SMB | ||
| MURS120T3G | SMB(Pb−Free) | |||
| MURS140T3 | U1G | SMB | ||
| MURS140T3G | SMB(Pb−Free) | |||
| MURS160T3 | U1J | SMB | ||
| MURS160T3G | SMB(Pb−Free) | |||
Our Strict Quality Control:
1. Our quality controller has working in our factory for more than 10 years, very expericed.
2. We will test the each product, each accessory before shipping, to make sure its high quality.
3. We will pack the cargo well to make sure the goods in good status during delivery.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.