10mm Thermal Insulation Xpe Pe Foam Roll Thermal Cooler Insulation
10mm Thermal Insulation Xpe Epe Foam Roll Thermal Cooler Insulation
Polyethylene foam sheets xlpe foam is made of Low-Density PE Polymer. Commonly made and used as an insulation & protective material for various Industry applications.CYG foam is a strong, resilient closed-cell foam and it has several outstanding physical properties such as;
- Closed cell cross-linked polyethylene foam
- Excellent thermal insulation
- Lightweight
- Cost-effective
- Easy to fabricate
- Non-dusting
- Superb strength, and tear resistance
- High shock absorption
- Flexibility
|
||||
| Property | Standard | Unit | Value | |
| Density | - | Kg/m³ | 33.33 | |
| Tensile Strength | Transverse | ISO-1798 | MPa | 0.39~0.41 |
| Longitudinal | 0.23~0.28 | |||
| Tearing Strength | Transverse |
ISO-8067
|
Kn/m | 1.84~2.26 |
| Longitudinal | 1.32~1.40 | |||
| Compression 25% | ISO-3386-1 | kPa | 36.80 | |
| Compression 45% | ISO-3386-1 | kPa | 66.70 | |
| Compression 50% | ISO-3386-1 | kPa | 96.90 | |
| Compression Set 25% 0.5H | ISO-1856 | % | 15.80 | |
| Compression Set 25% 24H | ISO-1856 | % | 5.80 | |
| Operating Temperature Range | Internal | °C | (-40,+80) | |
| Water Absorption % Volume (Maximum) | Internal | % | 0.50 | |
| Thermal Conductivity | JIS A1412-2 | W/mK | 0.040 | |
| Shore - C | ASTM D2240 | °C | 23 | |
| Flammability | FMVSS302 | mm/min | - | |
Additional Information
● All tests were carried out in 23°C ± 2.
● Data represents typical values measured on a 15mm thick specimen and should be considered as guidelines only.
● Processing method by eletronic heating.
● 12 kg/100m2 glue.
Raw material: LDPE, PE foam+Alu foil
Density: 25~333kg/m3
Length: customized
Wide: 70~1800 mm
Thickness:
xpe 2~3mm 3~12mm
Ixpe 0.1~0.5mm 0.5~3mm, 3~10mm
Color: black,white and gray,other colors can be customized
Shore hardness: 10~80 degree
Reflective:96%~97%
Structure:Closed cell
Surface smooth: Alu
Flammability:B1 grade
Refractoriness:100-150 degree
Thermal Conductivity:0.040~0.095 w/m.k
Water Absorption:(23degree,24h) 0.2~0.6%
Tearing Strength: 0.2~1.8 KN/m
Elongation at break :100%~240%
Tensile Strength: 0.2~1.6 Mpa
Compressed distortion: 2%~10%
Size change rate: -4%`-8%
Thermal conductivity: 0.040 ~0.095 w/m.k
Certificate: ISO9001,REACH,ROSH,IATF16949,CE
Packaging:roll, tape, gasket or seal formats
Applications
- Insulation on the dashboard, door panels, door armrests
- Lightweight product solution for automobile air duct
- Using for head pillow case by PIP filling&foaming technology
- Waterproof and soundproof car door material
- As damping and soundproofing foam products around the front of the cockpit
- Excellent Roof / Head Lining thermal insulation solutions
- Automotive NVH products solutions
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.