433MHz RF Data Module 100mW Wireless Data Transfer 1km RS232 RS485 TTL
100mW RF Data Module 433MHz Wireless Data Transfer 1km RS232 RS485 TTL
Introduction
LS-U100 is a UHF band 100mW data module. It transmits around 1KM LOS. This module adopts transparent transmission. Users don’t need any program knowledge. Designed with good performance IC TI CC1020 and high speed MCU, LS-U100 is an excellent RF transceiver. It has the advantage of small size, low power consumption, long transmission distance, and also, strong anti-interference ability.
Parameter:
- Power output: 5V DC
- RF power: 100mW
- Air baud rate: 1,200/2,400/4,800/9,600/19,200bps choose one
- Interface baud rate: 1,200/2,400/4,800/9,600/19,200bps programmable
- Frequency band: 433, 450, 470, 868, 915 or ISM others
- Interface: RS-232/RS-485/TTL
- Communication mode: half-duplex
- Channel: 8(default), 16/32(customized)
- Receive current: <40mA(TTL connect)
- Receive sensitivity: -123dBm @ 1,200bps); -118dBm @ 9,600bps)
- Transmitting current: <100mA
- RF line-of-sight range: 600m (BER=10-5@9600bps);
- 1,000m (BER=10-5 @ 1,200bps)
- Size: 47 x 26 x 10mm (without antenna port)
PERFORMANCE Power Output: 100mW RF Line-of-sight Range: 1000m@1200bps; 600m@9600bps RF Effective Rate: 1200/2400/4800/9600/19200bps Space Channel: 1MHz(Default), (12.5/25KHz customization ) Bandwidth: <25KHz Receiver Sensitivity: -120dBm@1200bps, -115dbm(9600bps) Data format: 8N1, 8E1, 8O1 (customize) COMPATIBILITY LS-UN10, LS-U100, LS-U1000, LS-UN5000 series POWER Supply Voltage: 5V DC Transmit Current: <40mA Receive Current: <20mA Sleep current: <20uA GENERAL Communication Mode: Half-duplex Frequency Band: 400MHz, or 450MHz, 470MHz Frequency modulation FSK/GFSK Channel: 8(default),16/32/64(optional) Interface: TTL, RS232, RS485 (choose one) PHYSICAL PROPERTIES Size: 47mm×26mm×10mm
(excluding antenna base and data pin)Weight: 20g Antenna Base: 50Ω, SMA Operating Temperature: Industrial:-40℃~+85℃(TCXO) Frequency Stability: ±2.5ppm Industrial
Application:
- Queuing machine wireless control
- LED display/ LED sign
- Factory automation
- Handhold device
- Irrigation system
- RS485 to wireless
- Robotics control
- Home automation
Pin Definition (9 pin)
| Pin No. | Signal Name | Function | Level | Connection with terminal | Remarks |
| 1 | GND | Grounding of power supply | Ground | ||
| 2 | VCC | Power supply DC | +3V ~5.5V | ||
| 3 | RxD/TTL | Data receiving | TTL | TxD | |
| 4 | TxD/TTL | Data transmitting | TTL | RxD | |
| 5 | SGND | Signal | |||
| 6 | A (TXD) | A of RS-485 (TxD of RS-232) | A(RxD) | ||
| 7 | B (RXD) | B of RS-485 (RxD of RS-232) | B(TxD) | ||
| 8 | SLEEP | Sleep control | TTL | Sleep signal | Low level valid |
| 9 | TEST | Factory testing |
Channel Configuration:
Each channel has its fixed frequency point which is pre-write to MCU in factory. The following is the configuration table for our common module. If you need other frequency points, please tell our sales when you place order.
| Channel No. | Frequency | Channel No. | Frequency |
| 1 | 429.0325MHz | 5 | 433.0325MHz |
| 2 | 430.0325MHz | 6 | 434.0325MHz |
| 3 | 431.0325MHz | 7 | 435.0325MHz |
| 4 | 432.0325MHz | 8 | 436.0325MHz |
Install Dimension:
How to connect with PC
Application Example
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.