100mW RF Data Module USB Interface Data Module 100m Distance Radio Transmitter

General Introduction

LS-U100S-USB is a UHF band 100mW data module. With elegant plastic casing, USB interface, it is convenient for you to connect with PC’s USB port. Easy to install, no program needed, no communication fee.

Parameter:

• Power output: USB power supply
• RF power: 100mW
• Air baud rate: 1,200/2,400/4,800/9,600/19,200bps choose one
• Interface baud rate: 1,200/2,400/4,800/9,600/19,200bps programmable
• Frequency band: 433, 450, 470, 868, 915 or ISM others
• Interface: USB
• Communication mode: half-duplex
• Channel: 8(default), 16/32(customized)
• Receive current: <40mA
• Receive sensitivity: -123dBm @ 1,200bps); -118dBm @ 9,600bps)
• Transmitting current: <100mA
• RF line-of-sight range: 600m (BER=10-5@9600bps); 1,000m (BER=10-5 @ 1,200bps)
• Size: 68x 45 x 18mm (without antenna port)
•  

Application:

• SCADA
• AMR (Automatic Meter Reading)
• Camera control (PTZ)
• Sports scoreboard control
• Electronic signs and message boards
• GPS fleet tracking
• Security systems
• Vending machine monitoring
• Remote weather systems
• Remote parking and gate access systems
• Remote weigh scales
• HVAC control
• Remote pump station control
• Homeland defense
• Robotics and control
• Wireless inventory control applications
• Pivot irrigation
• Airborne telemetry
• Remote instrumentation
• Wireless pressure and temperature sensors

Channel Configuration:

Each channel has its fixed frequency point which is pre-written to MCU in factory. The following is the configuration table for our common module. If you need other frequency points, please tell our sales when you place order.