LS-EC100 Wireless Irrigation Controller Soil Conductivity Sensor For Moisture / Temperature
LS-EC100 Wireless Irrigation Controller Soil Conductivity Sensor For Moisture / Temperature
LS-EC100 soil conductivity sensor has stable performance and high sensitivity. It is used to monitor and study the soil’s salinity. As an important tool for soil moisture monitoring, LS-EC100 is widely used for scientific experiment, water-saving irrigation, greenhouse, flower and vegetable irrigation, plant irrigation, soil measurement, waste water treatment, agriculture monitoring and so on.
LS-EC100 sensor has the following characteristics:
(1) Can measure conductivity of soil, fertilizer solution, and other nutrients.
(2) With special alloy materials, electrode can bear strong external impact to prevent damage.
(3) Good sealness, non-corrosiveness of acid and alkali. Can be buried in the soil or directly thrown into the water for long-term dynamic detection.
(4) high precision, fast response, good interchangeability, probe plug-in design to ensure accurate measurement, reliable performance.
(5) perfect protection circuit. Kinds of signal output interface optional.
Technique parameter
| Technique parameter | |||
| Signal output type |
Voltage output: 0-2V (output impedance: 0 ohms) |
Current output: 4-20mA (load resistance <500ohm) |
RS485 port Modbus protocol |
| Power supply | 3.6-30V/DC | 12-30V/DC | 3.6-30V/DC |
| Static power consumption | 6mA@24V DC |
50mA@24V DC (2 channels current output: 20mA) |
6mA@24V DC |
| Measure range |
2 types:0-50%,0-100% Resolution:0-50% 0.03%,50-100% 1% Accuracy:0-50% 2%,50-100% 3% |
||
| Conductivity range |
0-5000us/cm,10000us/cm,20000us/cm optional 0-10000us/cm 10us/cm, 100000-20000us/cm 50us/cm Accuracy: 0-10000us/cm, ±3%; 10000-20000us/cm, ±5% |
||
| Temperature compensation |
build-in temperature compensation sensor, compensation range 0-50℃ |
||
| Temperature measure range | ranges:-40~80℃,resolution:0.1℃,accuracy:±0.5℃ | ||
| Measurement method |
Moisture: FDR Conductivity: AC bridge plug into the soil or immersed into the solution directly. |
||
| IP level | IP68 | ||
| Working environment | -40~85℃ | ||
| Probe material | special designed Anti-corrosion electrodes | ||
| Seal material | black flame retardant epoxy resin | ||
| Installing way | Completely buried or probe insert into solution | ||
| Cable length | Conventional 2m, or length customize | ||
| Connection way | Pre installed cold pressed terminals | ||
| Dimension | 45*15*145mm | ||
| Electrode length | 70mm | ||
Wiring method
| Types | Wiring diagram |
| Voltage output type |
Red V+: Power supply Black G: Ground of power supply Blue O1: output signal (temperature) Brown O2: output signal (electronic conductivity)
|
| Current Output type |
Red V+: Power supply Black G: Ground of power supply Blue O1: output signal (temperature) Brown O2: output signal (electronic conductivity)
|
| RS485 Modbus Protocol |
Red V+: Power supply positive Black G: Ground of power supply Yellow T+: RS485+/A/T+ White T-: RS485-/B/T- Green SET: connecting to V+ (power positive), power on, it enters to setup mode Connecting to G(power ground) or no connection, power on, it enters to run mode
|
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.