PE Water Gas Supply Pipe Production Line Multi - Layer Co Extrusion
PE Water/Gas Supply Pipe Production Line (Multi-Layer Co-extrusion)
Technical parameter of PE Water/Gas Supply Pipe Production Line (Multi-Layer Co-extrusion) :
| Type | Pipe Space(mm) | Extruder | Max.output(kg/h) |
| HDPE63 | φ16-φ63 | SJ-45/33 | 200 |
| HDPE160 | φ63-φ160 | SJ-60/30 | 300 |
| HDPE250 | φ75-φ250 | SJ-75/33 | 400 |
| HDPE500 | φ160-φ500 | SJ-90/33 | 600 |
| HDPE630 | φ315-φ630 | SJ-120/33 | 1000 |
| HDPE800 | φ450-φ800 | SJ-120/38 | 1200 |
| HDPE1200 | φ710-φ1200 | SJ-150/33 | 1500 |
Product description of PE Water/Gas Supply Pipe Production Line (Multi-Layer Co-extrusion) :
Shandong Huasu Plastic Technology Co., LTD. depends on design production experience of many years, join together the domestic and international actual circumstance, developed full-automatic production line which from extruder including all automation units and peripherals, whole pipe production line realizes automatic control from charging to finished product.
The tube sizing of PE Water/Gas Supply Pipe Production Line (Multi-Layer Co-extrusion) :
1. Sizing sleeve with the entrance water curtain is applicable to the HDPE, LDPE and PP etc..
2. On the front end of butterfly type sizing sleeve carrying entrance water curtain there is a closed inside room, which is applicable to the small tube extrusion specially.
Mould of PE Water/Gas Supply Pipe Production Line (Multi-Layer Co-extrusion) :
1. Standard series: 10mm - 1600mm spiral allotment type or skep types flow divide body.
2. The best design of the low melting temperature causing small tube internal stress and smooth inside and outward appearance.
3. High flexibility is applicable to all polyolefin material multi-layer co-extrusion form.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.