K158 78mm Through Hole Encoder Thickness 43mm Aluminum Alloy Material IP50
Through hole 78mm K158 hollow shaft encoder thickness 43mm aluminum alloy material IP50
Production Catalogue
If you have already selected the encoder model you are going to order, please email us directly or contact online service right now to get the latest catalogue.
But if you are still have any doubts on choosing a right encoder model number, you are also free to contact us to get the related catalogue.
K158 Series encoder Characteristics
| Items | Basic parameters |
| Brand | HENGXIANG |
| Encoder type | Incremental encoder |
| External diameter | 158mm |
| Thickness | 43mm |
| Installation dimension | R85mm(spring plate 158T170) |
| Hollow shaft type | through hole (clamping ring at prior) |
| Hollow shaft diameter | 70mm,75mm,78mm;80mm;82mm |
| Consumption current | 100mA MAX |
| Top response frequency | 300KHZ |
| Insulation resistance | 10MΩ |
| GND | not connect to encoder |
| starting torque | less than 400 x 10-3 N.m |
| Intertia moment | less than 350x 10-6kg.m2 |
| Shaft load | Radial 90N; Axial 60N |
| Top REV | 3000RPM |
| Environmental temperature | Operating:-20 ～+80°；storage:-25 ～+85° |
| Environmental humidity | Operating and storage: 35-85%RH(noncondensing) |
| Vibration(endure) | Amplitude 1.52mm,5-55Hz,2 hours for three axis individually |
| Sock(endure) | 1960m/s2 (200g),11 ms three times for X,Y,Z direction individually |
| Shaft Material | Stainless steel |
| Shell Material | aluminum alloy |
| Cable length | 1000mm(cable with shielding) |
| Protection grade | IP50 |
| Cable length | 1M (cable length could be added appropriately by |
| require, but it need payment individually) | |
| Certification | CE |
| package | Carton box |
| Net weight | About 1800g (with package) |
Principle of encoder
An incremental rotary encoder outputs a certain amount of Pulses per Revolution. The higher this PPR number, the smaller the angle between each pulse. This PPR number is fixed for ordinary incremental encoders. Programmable incremental encoders can adjust this value to a desired number by a software change.
Today most incremental encoders have a Push-Pull (HTL) or RS422 (TTL) output driver, these have replaced most of the older output circuits like Open Collector NPN, Open Collector PNP, Voltage Output.
Push-Pull (HTL) circuits, also known as Totem Pole, provide a signal level which corresponds to the applied supply voltage. The supply voltage typically ranges from 8 to 30 VDC.
With proper connections you can use the Push Pull interface to replace true open collector circuits by using an external diode connected in a way to limit the direction of the current for RS422 (TTL) circuits provide a constant 5 V signal level that is not dependent on the supply voltage. Two supply voltage ranges can be selected: From 4.75 to 5.5 VDC (can be used to replace open collector output drivers) or from 8 to 30 VDC. Using differential signals the output fully complies to the RS422 standard.
Production date
1. for 1-10 samples: 3-5 working days
2. for 20-50 mass production: 7-10 working days
3. for over 100pcs, production will be discussed with customers and ship on time
Payment terms:
1. T/T, western union, credit card, Paypal, etc
2. 3-5 working days after payment received
3. Encoders will be shipped once ready
Shipment
Goods can shipped via TNT, FedEx, UPS, DHL, EMS, etc.
You could select the express according to your requirements if freight collector
If you do not have any courier account, we will check and find a cheapest and safety express for you.
Our factory has 30% discount with most courier company, so price could be as cheap as possible.
More information
If you are looking for more information about our factory or about our products, please contact us or email us right now, we will reply you as soon as possible.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.