F7 CK45 Chrome Plated Rod 16mm Chrome Plated Cylinder Rod
F7 CK45 Chrome Plated Rod 16mm Chrome Plated Cylinder Rod
Introduction of Chrome Plated Rod
Chrome Plated Rod for hydraulic and pneumatic cylinder, precision linear motion shafts, induction hardened chrome plated bars and stainless steel bars. We have rich experience in manufacturing process such as pilling, straightening, induction hardening, grinding, polishing, surface coating and machining of chrome plated bars. Our range of hard chrome plated rods is fabricated using premium quality raw material. Each component produced in this production division meets the highest standards of exact manufacturing tolerance, straightness and surface roughness.
Parameters of Chrome Plated Rod
|
Model
|
F7 CK45 Chrome Plated Rod 16mm Chrome Plated Cylinder Rod
|
||
|
Diameter
|
Metric Diameter:3mm,4mm,5mm,6mm,8mm,10mm,12mm,16mm,20mm,25mm.....300mm
Inch Diameter:6.35mm.9.525mm.12.7mm,15.875mm,19.05mm,25.4mm,31.75mm,38.1mm
|
||
|
Length
|
Full Length 6000mm, it can be cut off according to customer requirement.
|
||
|
Quality
|
ISO9001:2008 standard
|
||
|
Material
|
CK45 (SAE1045, S45C), 42CrMo (SAE4140), 20MnV6,St52, Stainless Steel
|
||
|
Surface finish
|
Hard Chrome / None Chrome
|
||
|
Plating Thickness
|
10um ~ 20um in radius.
|
||
|
Heat treated
|
Not Hardened / Induction Hardened
|
||
|
Hardness
|
HRC:58-62
|
||
|
Hardness Depth
|
0.8-3.0mm
|
||
|
Precision
|
g6, h6, h7 or according to your requirement.
|
||
|
Roughness
|
Less than 1.5μm
|
||
|
Straightness
|
Less than 1.5μm of 100mm (Rmax)
|
||
|
Roundness
|
Less than 3.0μm (Rmax)
|
||
|
Performance
|
Long life and low noise
|
||
|
Custom-made
|
End Stepped, End Tapped, End Tread, Wrench Flats, Cross Drilled Holes, Key Groove, Set Screw Grooved, and so on.
|
||
technical standard:
Outer diameter accuracy: f7, f8, h7
Surface finish: ≦Ra0.4S
Roundness: ≦0.01mm
Straightness: ≦0.15/1000mm
Hard chrome plating thickness: 0.015~0.05mm (can be customized according to customer requirements)
Surface hardness: HB220-260
Standard outer diameter: ￠3~￠120
Standard length: 1000-6000mm
Material: S45C (45#), 40Cr, GCr15, 2Cr13, 42CrMo, SUS304, SUS303, SUS316, etc.
Pictures
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.