3mm 4mm 5mm Metric Chrome Plated Piston Rod Not Hardened
3mm 4mm 5mm Metric Chrome Plated Piston Rod Not Hardened
Introduction of Metric Chrome Plated Piston Rod
The Metric Chrome Plated Piston Rod is a connection part that supports the work of the piston.
Most of them are used in oil cylinders and cylinder motion execution parts. It is a moving part with frequent movements and high technical requirements.
Parameters of Metric Chrome Plated Piston Rod
|
Model
|
3mm 4mm 5mm Metric Chrome Plated Piston Rod Not Hardened
|
||
|
Diameter
|
Metric Diameter:3mm,4mm,5mm,6mm,8mm,10mm,12mm,16mm,20mm,25mm.....300mm
Inch Diameter:6.35mm.9.525mm.12.7mm,15.875mm,19.05mm,25.4mm,31.75mm,38.1mm
|
||
|
Length
|
Full Length 6000mm, it can be cut off according to customer requirement.
|
||
|
Quality
|
ISO9001:2008 standard
|
||
|
Material
|
CK45 (SAE1045, S45C), 42CrMo (SAE4140), 20MnV6,St52, Stainless Steel
|
||
|
Surface finish
|
Hard Chrome / None Chrome
|
||
|
Plating Thickness
|
10um ~ 20um in radius.
|
||
|
Heat treated
|
Not Hardened / Induction Hardened
|
||
|
Hardness
|
HRC:58-62
|
||
|
Hardness Depth
|
0.8-3.0mm
|
||
|
Precision
|
g6, h6, h7 or according to your requirement.
|
||
|
Roughness
|
Less than 1.5μm
|
||
|
Straightness
|
Less than 1.5μm of 100mm (Rmax)
|
||
|
Roundness
|
Less than 3.0μm (Rmax)
|
||
|
Performance
|
Long life and low noise
|
||
|
Custom-made
|
End Stepped, End Tapped, End Tread, Wrench Flats, Cross Drilled Holes, Key Groove, Set Screw Grooved, and so on.
|
||
technical standard:
Outer diameter accuracy: f7, f8, h7
Surface finish: ≦Ra0.4S
Roundness: ≦0.01mm
Straightness: ≦0.15/1000mm
Hard chrome plating thickness: 0.015~0.05mm (can be customized according to customer requirements)
Surface hardness: HB220-260
Standard outer diameter: ￠3~￠120
Standard length: 1000-6000mm
Material: S45C (45#), 40Cr, GCr15, 2Cr13, 42CrMo, SUS304, SUS303, SUS316, etc.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.