Various Size Tungsten Carbide Roll Rings , 100% Original Carbide Mechanical Seal Ring
Various Size Tungsten Carbide Roll Rings , 100% Original Carbide Mechanical Seal Ring
Tungsten Carbide Roller
1. 100% raw material to produce tungsten carbide products.
2. Hip sintered, high hardness, high wear resistance
3. Various sizes and full types available
4. Reasonable price,Fast delivery time
5. OEM Customized(small order accepted,professional technical support)
1. Tungsten carbide mold is in high precision,the tolerance can according yours.
2. For the shape,size,material etc. are made by customers' needs and requirements.
3. It has many advantages such as Wear resistant, Heat resistant and Corrosion resista and so on.
Descriptions of Product
| ADE | DENSITY g/cm3 | TYPICAL VALUE | APPLICATION SCOPE | |
| HARDNESS | BENDING STRENGTH | |||
| YG3 | 15.10~15.30 | 92.5 | 1700 | Superior wear resistance only less than YG3X, sensitive to impact and vibration, suitable for cast non-ferrous metal and its alloy finish turning, semi-finish turning, thread finish turning anhole expanding. |
| YG3X | 15.10~15.30 | 93.6 | 1450 | Best wear resistance in Tungeten and Cobalt alooy, but not good in anti-impact proprety, suitable for cast iron, non-ferrous and alloy, quenched steel, alloy steel small cutting section machining at high speed. |
| YG6X | 14.80~15.00 | 92.4 | 2000 | Belong to small granule Tungsten carbide alloy, wear resistance higher than YG6. Suitable for machining cold and hard alloy cast iron and heat resistance alloy steel, as well as finish machiing for normal cast iron. |
| YG6 | 14.80~15.00 | 91.1 | 2100 | High wear resistance but less than YG3, better anti-impact and anti-vibration than YG3X, Suitable for cast iron, non-ferrous and alloy, non-metal material semi-finish machining and finish machining. |
| YG6A | 14.8~15.00 | 92.8 | 1850 | Belong to small granule alloy, wear resistance hig, suitable for semi-finish machining of cold and hard cast iron, non-ferrous and alloy, as well as semi-finish machining and finish machining for quenched steel, alloy steel |
| YG8 | 14.6~14.80 | 90.5 | 2300 | High bending strength resistance, better anti-impact and anti-vibration than YG6, suitable for cast iron, non-ferrous and alloy, non-metal material rough machining at low speed. |
Welcome your inquiry.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.