JUYI 15A Current Brushless Motor Controller , Rectangle Brushless Speed Controller Motor Driver Board
Price:
Negotiable
MOQ:
1 set
Delivery Time:
5-10 days
Brand:
JUYI
Product Description
24VDC 15A current PWM speed control Hall effect BLDC motor driver JYQD-V7.3E3
MODEL: JYQD-V7.3E3
OPERATING TEMPERATURE(℃) : - 20---85℃
OPERATING VOLTAGE(V): 24V
Max Power: 500W
CONTINUOUS OPERATING CURRENT: 15A
PWM SPEED REGULATION: (1-20KHZ)Duty cycle 0-100%
ANALOG VOLTAGE SPEED REGULATION (V): 0-5V
Speed pulse signal output: YES
Applications:
BLDC fan
BLDC motor
BLDC cooling fan
BLDC lawn mower
BLDC centrifugal blower
Wiring diagram
1. Control port
5V —Driver board internal output voltage, external potentiometer or switch for speed adjustment and reversing operation
Z/F —Rotating direction control ports. Connect “5V” high level or no connect is Forward direction, connect 0 V low level or connect to GND is reverse direction.
VR —Speed control port. Analog voltage linear speed regulation 0.1v -5V, The input resistance is 20K Ohm ,connect with GND when input PWM speed regulation, PWM frequency:1-20KHZ; Duty cycle 0-100%
EL —Enable port control. Connect 5V or no connect to allow operation, connect GND to forbid operation.
Signal— Speed pulse signal output
GND—Used for Drive board internal control
2. Power port
| MA ----motor phase A |
| MB ---- motor phase B |
| MC---- motor phase C |
| GND ----DC- |
| VCC----DC + |
3:Hall sensor port
Ha--- Hall a
Hb---Hall b
Hc---Hall c
GND---GND
5V---5V output
Dimensional drawing
| Application guidelines | |
| 1. | Confirm that the voltage and power parameters of the motor not exceed the range as specified. |
| 2. | Applicable to hall brushless dc motor with Hall at 120°, not all manufacturers' Hall line sequence are corresponding, you can adjust the Hall line sequence or motor three-phase line sequence according to the actual situation, to achieve the best driving effect. |
| 3. | JYQD-V7.5E is driver board without housing and heatsink, it can drive the motor below 100 watt without any heatsink, but needs normal ventilation. |
| 4. | The 5V output port on the drive board is forbidden to connect external power equipment. It is only applicable to external potentiometer or switch for speed adjustment, commutation and enabling operation |
DOWNLOAD JYQD-V7.3E3 USER MANUAL
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Shanghai Juyi Electronic Technology Development Co., Ltd
Location
No. 1, lane 1199, yunping road, jiading district, Shanghai,China
Contact Person
Lisa Jiang