BHS / TCY / YIKE GROUP / JS Kevlar Edge Corrugator Belts

Price Negotiable

Price: $5,000.00 /set

MOQ: 1set

Delivery Time: 20 days after deposit

Brand: YIKE GROUP

Product Description

BHS / TCY / YIKE GROUP / JS Kevlar Edge Corrugator Belts

1. Features

● 200mm kevlar edge

● Composition of cotton, synthetic and IFDY

● High moisture absorption and release; Low noise and high speed

● Woven structure, anti-skidding

2. Introduction

Corrugator belt also named Corrugated board conveyor belt.

Corrugator belt is for corrugated board production line and developed specifically for Double Facer. Corrugator belts consistently keep the fastest absorption & release of moisture, which secures high-quality cardboards with less consumption of heat and energy, and higher speed is assured. Corrugator belts have been specially developed for the transport of board and optimization of the drying process, they resist the stress continuously and achieve as long a life as possible.

3.Technical Specifications:

Type	YKK-Kevlar Edge Corrugator Belts
Thickness	(9±0.30)mm
Width	(1600-2800)mm
Heat-resistance	Kevlar Edge part up to 350℃
Tensile strength	75Mpa
Coefficient of friction	≥0.4u
Weight per unit	(7.5 ± 0.3)kg/m2
Air-permeability	2.2m3/m2min.

4. Products Features

Tensile strength	Warp direction (63-75) Mpa in dry mode
Heat resistance	Raw materials are polyester synthetic fiber, softening point≥260ºC
Moisture absorption	Quick absorption and emission of heat, therefore cardboard can be quickly dried
Seams	Belt seam part is fabricated with imported steel fasteners and filled with rubber, flat surface, heat- resistance, fastness and non-marking
Suitability	Suitable for BHS, JS, TCY, CHAMPION, YIKE GROUP, FOSBER corrugators, various cardboards and some particular operation mode.
Geometrical dimension	Steady belt dimension, high weaving density, low stretching and contraction and good contact between belt surface and cardboard.
Service life	As long as the same products imported abroad.