5 Ply Paper Sheet Automatic Flute Laminating Machine For Corrugated

Price Negotiable

Price: Negotiation

MOQ: 1 Set for 5 Ply Paper Sheet Flute Laminator For Corrugated Paper

Delivery Time: 30 days after deposit

Brand: YIKE GROUP

Product Description

5 Ply Paper Sheet Flute Laminator For Corrugated Paper

Specification

Name	Requirement	Requirement		Requirement
Model	YK-1300	YK-1450		YK-1600
Max. Paper size(W*L)	1300*1300 mm	1450*1300 mm		1600*1300 mm
Min. Paper size(W*L)	500*500 mm			600*600 mm
Face paper thickness	250-500 g/m2(standard paper board)
Flatness requirements on face paper	Curve height should be less than 0.2 times the paper thickness
Requirements on film	Film ends should be less than 2 times the paper thickness
Bottom paper	A,B,C,E,F flute
Flatness requirements on the bottom paper	Within 15/1000 mm
Corrugated paper deflection	Curve height should be less than 0.2 times of paper thickness, the deflection should be less than 2times of flute height
Requirements on the height of corrugated flute	If there is a difference between the two flutes, the difference should be within 1/20 of the corrugated height
Diagonal requirement	Less than 3/1000 mm
Size requirement on face paper and bottom paper	The size of face paper should be 8 mm larger than that of the bottom paper
Laminate layers	Face paper+corrugated paper=3 layers or Face paper+corrugated paper+corrugated paper=5 layers(total thickness less than 10 mm)
Precision	±1.5mm(according to the paper quality)
Speed	100 m/m(theoretical value )	90 m/m(theoretical value)
Production efficiency	0-6000 sheets/h	0-5000 sheets/h
Height of face paper pile	1600 mm
Face paper table capacity	1500 KG
Height of bottom paper pile	400 mm
Total Power	33 KW	34 KW
Voltage	Three-phase 380V
Efficient pressing length	6000 mm
Conveying height	250 mm
Adhesive medium	Corn starch glue
Collecting table size(W*L)	1300*1300 mm	1450*1300 mm	1600*1300 mm
Collecting table capacity	300 KG
Dimension(LWH)	2200022002500 mm(Subject to machine)	2200024002500 mm(Subject to machine)	2200025502500 mm(Subject to machine)
Machine Weight	About 7.5 T(Subject to machine)	About 7.8 T(Subject to machine)	About 8 T(Subject to machine)
5 Ply Automatic Flute Laminator Offer		US$ EXW FACTORY
Delivery Time		60 days after deposit
Payment		30% T/T deposit and the balance before shipping

Machine structure

Face paper conveying section adopts advanced four sucking and four delivering feeder, with the help of high pressure vacuum pump it can feed the face paper 200-500gsm efficiently. Pre-loading structure reduce the face paper loading time greatly.
Position displaying hand wheel on the face paper pile loading section makes the loading action more accurate and more convenient for the bottom paper loading at the same time. Limited switch fixed on face paper loading section makes the moving up action more accurate.
Conveying belt, pressing roller and automatic chasing lay all do help to the face paper delivery. Pressing roller adopts the specialized roller which is used on print machine, it can delivery both thick and thin paper effectively. Anti-curl structure helps to delivery face paper at the same time.
Both bottom paper feeding section adopt vacuum sucking belt with high strength and high friction allowing the non-stop feeding. Rotating paper supporter equipped on this section makes it possible to feed the long sheet.
Knurled roller on the bottom feeding part makes sure the stable running when the machine in a high speed.
Chasing lay and high-speed axial flow fan differential positioning system is applied on the bottom paper feeding part. You can adjust the front and back position without stopping the machine. Synchronous slot design can control the bottom paper feeding in a minimum range; Chasing lay can make sure a good bottom sheet feeding when the machine is running at a high speed.
Gluing system has liquid induction device, glue will be supplied accordingly and will be recycled, glue cost will be reduced greatly.
The gluing system in this machine is a combination of anilox type steel roller and rubber glue even roller in which the rubber glue even roller is core structure designed and differential speed gluing method is applied to make a even glue and increase the gluing quality. Averagely 25-35grams glue will be used on one square meter, reducing the cost and improving the laminated paper board quality.
Both bottom paper and face paper adopt front elastic registration lay so that there is no need to readjust for big or small paper. The intelligent control system makes it possible to adjust the face paper position automatically when the machine is in running. The digital instrument on the front lay part can make the front lay adjustment range to 0.1mm.
Photoelectric detector helps the conveying of top or bottom paper accurately..
Grooved steel positioning wheel has long service life and easy to clean.
Double pre-pressing roller are equipped on the laminating unit.
Automatic damping system is applied on the bottom sheet feeding system to prevent the curving of the laminated sheet.