BV16 Square Copper Cable Coax Grounding Kit For 7/8" Feeder Cable
16 square copper cable buckle grounding kit for 7/8" feeder cable
It's suit for 7/8" feeder cable in the communication base station. Feeder grounding kit is suit for the feed system, grounding device respectively located in the central closest to the position of the antenna tower, tower cable bend at the bottom of the front, and on the device shielding, in central tower with high tower is needs to add with grounding device.After installing the feeder ground card, the antenna feed system and the communication equipment in the machine room can be protected from the damage of lightning.
The product from the thunder and lightning protection grounding bus bar can defense is as high as 125 kva, its high quality copper structure can be moisture and moisture absorption, components can be additionally equipped with tape at the same time, the installation requires no additional tools, on the basis of convenient shorten the installation time.
Component part:
| No | Name | Type | Qty | Note |
| 1 | Grounding kit | 7/8" | 1 | customer's requiremet |
| 2 | Grounding Cable | 16² copper cable | 1 | 3M |
| 3 | Bolt | M8 X 25 | 1 | Stainless steel |
| 4 | Nut | M8 | 1 | Stainless steel |
| 5 | Washer | ø8 | 1 | Stainless steel |
| 6 | Spring Washer | ø8 | 1 | Stainless steel |
Grounding clamp's performance index:
| component | electrical property | mechanical property | instruction |
|
clamp: stainless steel connecting piece:T2 pure copper: standard configuration0.6, 0.8, 1m Bolt and nut: stainless steel layering: stainless steel |
current:8/20μS≥70KA voltage:50Hz 30KV groundingresistance:≤4mΩ |
stainless steel: smooth rubber: clean, no damage and bubbles, density consistent grounding line: no crack and aging screw, bolt and nut: clean and no crack layering: stainless steel |
quick and easy to install and appearance neat |
Exempt gum type grounding clamp:
| serial number | product instruction |
| SY-DK-1 | outdoor 1/2"feeder grounding clamp |
| SY-DK-2 | outdoor 7/8"feeder grounding clamp |
| SY-DK-3 | outdoor 11/4"feeder grounding clamp |
| SY-DK-4 | outdoor 15/8"feeder grounding clamp |
| SY-DK-5 | outdoor 7/8"feeder grounding clamp |
Electric Property:
| Current | 8/20 μs >70KA |
| Voltage | 50Hz 30kv |
| Grounding Resistance | ≤ 4mΩ |
Mechanical capacity:
- Stainless steel material: smooth surface, no burr and crack, there is no obvious inclusion and sink mark
- rubber material: clean surface, no injury and bubble
- consistent density grounding wire: uniform insulating barrier, no crack and surface aging
- Bolt & nut: clean surface, no crack and rust staining
Look forward to your inquiry on 16 square copper cable buckle grounding kit for 7/8" feeder cable.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.