Blowing Dynamic Sand And Dust Test Chamber 150μm MIL-STD-810
Dynamic Dust Chamber can meet more severe experimental conditions, test the sealing of products, and have higher requirements on the performance and shell protection capabilities of production products, and are more used in testing military products and aerospace components
Technical Specification
| Name | MIL-STD-810H METHOD 510 Dust And Sand Test Equipment |
| Model | DIM-1000 |
| Internal Dimension | 1000*1000*1000mm D*W*H |
| Overall Dimension | 2800*3500*2000mm D*W*H |
| Interior Volume | 1000L |
| Air velocity | 1.5 -8.9m/s |
| Concentration of dust | 10.7±7g/ m³ |
| Dust particles | ＜ 150μm |
| Air velocity | 18.0 -29.0m/s |
| Concentration of sand | 0.18+0.2g/m³; 1.1+0.3g/m³; 2.2+0.5g/m³ |
| Sand particles | 149μm - 600μm, 600μm - 850μm |
| Controller | Programmable color LCD touch screen controller |
| Door Lock | Electromagnetic lock |
| Testing Platform Diameter | 600mm |
| Testing Platform Speed | 1-7 r.p.m |
| Exterior Material | A3 Steel Plate with protective coating |
| Interior Material | SUS304 stainless steel |
| Standard | MIL-STD- 810g |
Design Detail
 |
 |
| Workroom | Large Centrifugal Fan |
 |
 |
Standard Configuration
Configuration of Dynamic sand chamber
●Temperature range: 23℃～70℃
●Temperature deviation: ≤±2℃
●Humidity range: <30%RH
●Dust blowing wind speed: 1.5～8.9 m/s
●Sand blowing wind speed: 18.0～29.0 m/s
●Dust concentration: 3.0～17.6 g/m³ (10.7 ± 7 g/m³)
●Test dust: quartz dust
●Dust size: ≤ 149 μm to pass through a sieve with a diameter of 150 μm
Environmental Conditions
Dust blowing test chamber
●The MIL-STD-810 standard covers a wide range of environmental conditions, mainly including: high altitude and low pressure, high and low temperature including temperature shock (including both storage state and working state tests), rain (including wind blowing test and freezing rain test), humidity, etc.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.