Hot Cold Thermal Cycle Test Chamber 220 Degree High Temp
LIB 220 Degree Hot Cold Thermal Cycle Test Chamber
Description
Environmental conditions have a considerable effect on the function and the reliability of electronic components, devices and systems. The main purpose of LIB 220 Degree Hot Cold Thermal Cycle Test Chamber is to determine, if sudden temperature changes have an influence on the specimen’s long term function. In addition, early failures due to part and workmanship defects can be provoked without reaching the mechanical and thermal stress limits of the construction.
Products Parameters
|
Name |
LIB 220 Degree Hot Cold Thermal Cycle Test Chamber |
||||
|
Model |
TS-340 |
||||
|
Inner dimensions of test room (mm) |
450*450*360 |
||||
|
Volume of test room (mm) |
72L |
||||
|
Load of test room |
30kg |
||||
|
Overall dimensions(mm) |
1710*1020*1845 |
||||
|
Pre-heat room
|
Upper limit preheat temperature |
+220℃ |
|||
|
|
Heating time |
Ambient temperature to ~ + 200℃, within in 30 minutes. |
|||
|
Pre-cool room |
Lower limit pre-cool temperature |
-75℃ |
|||
|
|
Cooling time |
Ambient temperature to ~ -70℃, within in 30 minutes |
|||
|
Test room |
High temperature exposure range |
Ambient temperature +20 to +200°C |
|||
|
|
Low temperature exposure range |
–65 to -5°C |
|||
|
Recovery time |
Within 15 minutes |
||||
|
Temperature fluctuation |
≤±0.5℃ |
||||
|
Temperature deviation |
≤±3 ℃ |
||||
|
Controller |
Programmable color LCD touch screen controller |
||||
|
Cooling system |
Mechanical compression refrigeration system |
||||
|
Refrigerating unit |
French TECUMSEH compressor |
||||
|
Refrigerant |
R404A, R23 |
||||
|
Air circulation |
Centrifugal wind fan |
||||
|
Exterior material |
Steel Plate with protective coating |
||||
|
Interior material |
SUS304 stainless steel |
||||
|
Power Supply |
380V 50HZ |
||||
|
Environmental conditional |
5℃～+40 ℃ ≤85% R |
||||
Design and Construction
|
|
|
|
Test Area |
Cable Hole |
Temperature Range
Hot Chamber:Ambient ~ + 200℃, within 30 minutes
Cold Chamber: Ambient ~ -70℃, within 30 minutes
Application
Temperature cycle test chamber is designed for the safe, efficient, and accurate environmental testing of electronics and consumer products, and aerospace, telecommunications, and military and defense components. Non-hazardous
Features
1.Horizontal air circulation
2.rapid-responding, nichrome wire heating elements
3.Two zone types with hot/cold compartment setups
4.Vapor-tight, interior liners made of 100% continuously welded stainless steel
5.Fully automatic, PID chamber control through alpha-numeric display
6.The sealing rubber insulators
7.Fiberglass and polyurethane insulation ensures minimal thermal transfer
8.Dual-carriage transport system with stainless steel, wire mesh basket
9.Adjustable recirculation air louvers for optimum performance
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.