ETL HNS201 Microwave Motion Sensor Switch Zero Cross Protection 120-277VAC
120-277V AC input ETL certification on/off and lux off function by DIP switch setting
Features--
| 120-277V AC / 220-240V AC |
| Detection range: about 12m in diameter. |
| Mounting height: 3-6m. |
| Rated road:200W @ 120V AC, (capacitive)；400W @ 200-277V AC, (capacitive) |
| Stand-by power: <0.5w important |
| Zero-cross point operation, protect the sensor relay against the in-rush current, secure the max. load and life time of the relay . |
Detection range
Detection range can be reduced by selecting the combination on the DIP switches to fit precisely each application.
Hold-time means the time period to keep the lamp on 100% after motion detected.
* when hold-time set as 3s, sensor enters into test mode, this test mode is mainly for
users to choose the desired detection range.In this mode, the daylight sensor is disabled,
when there is no motion, fixture keeps off, when there is motion detected, fixture
keeps a cycle of 3s on and 2s off.
Daylight sensor means the daylight threshold to enable or disable the sensor function.
“Disable”: The sensor works always, even during daylight.
“50lux, 25lux”: The sensor works only in twilight.
“10lux, 2lux”: The sensor works only in the dark.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.