Laser Diameter Measuring Gague Workpiece Outer Diameter Detection
LDM-50S Workpiece Outer Diameter Detection Laser Diameter Measuring Gague
Axis Diameter Measuring Gauge uses laser scanning principle to realize non-contacting and high-precision measurement and control. It can be used for matal shaft, rubber roller, magnetic roller to show the diameter, non-roundness and runout.
1. Technical parameters
| Model | Measuring Range | Resolution | Accuracy |
| LDM-50S | 0.2-45mm | 0.001 | 0.002mm |
| LDM-100S | 0.2-95mm | 0.01 | 0.01mm |
| LDM-150S | 0.2-145mm | 0.01 | 0.01mm |
2. The performance indicators
Measurement: Laser scanning
Laser: Visible red semiconductor laser
Laser output power: <2mW
Operating voltage: ~ 220V plus/minus 15% 50 - 60Hz
Operating temperature: -10 ~ 40 Degrees Celsius
Humidity: <85% RH
Work mode: continuous
Power consumption: <30W
3. Display Controller (Model:DDC-6)
1). It be used to remote display and control.
2). Can simultaneously measure the outside diameter, roundness, runout, including oval diameter. It can be used for shaft testing, the detection of rubber roller, honeycomb ceramic detection.
Signal distance: more than 500m
Output voltage: plus/minus10V
External dimensions: 350mm * 350mm * 100mm (Model:DDC-6)
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.