Three Phase 8V 500A Plating Switching Rectifier
Price:
900$ ~1300$
MOQ:
1 unit
Delivery Time:
10~15 work days
Brand:
xingtongli
Product Description
8V 500A plating switching rectifier
Electroplating involves the process of coating conductive surfaces with metal. The reason for electroplating metals is to make them have more beautiful appearance, inhibit corrosion, reduce friction, harden metals, enhance their paint adhesion, improve their solder ability and many other reasons.
Direct current critical to a successful plating process can come from a low voltage generator or rectifier. Initially, generators were the main source of direct plating current, but due to the high cost of purchase and maintenance of these generators, rectifiers became a cheaper alternative.
8V 500A plating switching rectifier Specification
| SPECIFICATIONS FOR GKD8-500CVC | |||
| Input AC | 220V±10% | 3 phase | 50/60Hz |
| Output DC | Volt | 0~8V Adjustable | |
| Current | 0~500A Adjustable | ||
| Power | 4KW | ||
| Efficiency | >85% | ||
| output Frequency | 40KHz fixed | ||
| output ripple | 3% | ||
| Protection | Short circuit protection Overheating protection Phase lack protection Input over/low voltage protection |
||
| Working Condition (Temperature) |
-10℃~50℃ | Control mode | Panel control Remote control |
| Net weight | 45kg | Working mode | Constant Voltage(CV) Constant Current(CC) |
| Dimension(mm) | 69*55*52mm | Cooling way |
air cooling |
8V 500A plating switching rectifier feature:
there are many important characteristics of a rectifier which makes them more suitable than a low-voltage generator for electroplating processes:
Rectifier saves energy; it adopts a high-frequency switching power supply transformer and as a result, the efficiency at which it converts current improves.
It is lightweight and also very small; if you have a thyristor rectifier, the size and weight will be 1/5-1/10. This weight and size make it very easy for you to expand, plan, install, maintain and move as the case may be.
Easy modulation; Rectifier output waveform can be modulated. Due to high frequency, the cost of output waveform adjusting processing is low and can be easily changed depending on what the users require. As a result, there will be room to improve the efficiency on site and also improve the quality of processing product.
Stability of output; the system has a high response speed, and as a result, the rectifier can adapt strongly to load changes and electricity network. This characteristic will ensure the accuracy of more than 1%. Also, the switching power supply works very efficiently to enable high precision control which will, in turn, improve the products quality.
1. Reduction of porosity; as the rate at which nuclei forms is greater than the rate of growth, it leads to nuclei refinement.
2. Improve the binding force; rectifier enable the film to break down, and as a result, there will be a strong bond between the coating film and substrate.
3. It enhances the capacity for coverage and dispersion
4. It helps to reduce the stress on the coating; a rectifier help to reduce internal coating stress and as a result, there will be a reduction of additive and an achievement of a crack-free coating film.
5. Rectifier helps a lot if you want to achieve an alloy coating composition that is stable.
6. With a rectifier, there will not be a need for anode activator since it improves the dissolution of an anode
Product picture:
Installation
produce process :
From the beginning of the raw material to the selection, to the assembly, and finally commissioning. We will enforce the standards strictly. Before package, 24V 125A dc single output switching power supply with CE will be check again to ensure that it works normally.
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Chengdu Xingtongli Power Supply Equipment Co., Ltd.
Location
No. 327, Xingye Road, Industry East Area, Xindu, Chengdu city, sichuan province, China
Contact Person
Una Wang