O3 Ozone Leakage Fix Wall Mount Toxic Gas Detector Monitoring Disinfection Process
Monitoring O3 Ozone Disinfection Process O3 Leakage Fix Wall Mount Toxic Gas Detector
YT-98H-WH / YT-98H-WH-A series is a built-in pump-suction single & multi gas detector, which can detect 1-6 kinds of gases simultaneously and continously. With IECEx, ATEX certificate (on-going) and non-contact magnetic wand design, it can be installed and operated in explosion proof areas in Oil & Gas industry. In addition to 3-wire 4-20mA output with relay, it also offers Modbus protocols, making it compatible with most control systems. With optional wireless function, operator can view data on laptop, mobile phone or cloud system remotely.
PID O3 Sensor Monitoring advantage:
- With internal suction pump, fast response
- Up to 6 kinds of gases can be detected at the same time. In complex and multi-gas environments, multiple installations can be reduced, saving time and effort.
- 2.4-inch industrial-grade high-definition color screen with a resolution of 320*240 and a wide viewing angle of 120 degrees.
- With wireless module, data can be uploaded to the cloud platform, environmental protection bureau or other
- Platforms, providing SMS reminder function, the transmission signal is not limited by distance, and can be viewed in real time on mobile phones and computers. (optional)
- With full software automatic verification function and zero calibration function, making gas monitoring more accurate and more reliable.
- Standard 4-20mA current signal, RS485 modbus signal, 1 set of relay signal output
- Standard infrared remote control, which can remotely control the detector and modify the detector settings.
- With sound and light alarm function, there is sound and light alarm when reaching the alarm point. (optional)
O3 Sensor Monitoring Specification
| Sampling method | Built in pump | ||
| Pump flow rate | 0.35-0.5 L/Min | ||
|
Gas detected |
Ozone(O3),VOC, Oxygen(O2), Combustible gases(EX/LEL), Carbon monoxide(CO), Hydrogen sulfide(H2S), according to customer's requirements |
||
|
Detection principle |
PID 10.6eV, 11.7eV, Catalytic combustion/Infrared Ray(LEL), Electrochemistry(O2 CO H2S), sensor and ic are imported from UK, fast response and high precision |
||
|
Install method |
Wall-mounted, piping type, flow-type (according to the detected environment) |
||
|
Measure range |
O3:0-1ppm, 0-10/20/50/100ppm, 0-10000ppm VOC: 0-1ppm, 0-3ppm, 0-10ppm, 0-100ppm, 0-500ppm, 0-1000ppm, 0-10000ppm O2: 0-30%VOL/0-25%VOL EX: 0-100%LEL/0-100%VOL CO: 0-500ppm/0-1000PPM/0-2000ppm H2S: 0-100ppm/0-200PPM (Measure range is optional) |
||
|
Resolution |
O3: 0.01ppm, 0.1ppm VOC: 0.001ppm, 0.01ppm, 0.1ppm, 1ppm O2: 0.01%VOL EX: 1%LEL/0.01%VOL CO: 0.1ppm/1PPM/1ppm H2S: 0.01ppm/0.1PPM |
||
|
Precision |
≤± 2% FS |
||
|
Signal output |
4-20mA, RS485, 1 set of relay output; 1-5VDC(optional), 2 sets of relay output(optional) |
||
|
Response time |
≤10S |
Recovery time |
≤10S |
|
Repeatability |
≤±1% |
Linearity error |
≤±1% |
|
Zero shift |
≤±1%(FS/year) |
Display |
High-light nixie tube display |
|
Connection mode |
G1/2 external thread explosion-proof flexible pipe |
Unit |
ppm, mg/m3, g/m3, %LEL, %VOL |
|
Temperature |
-20 to 50°C |
Humidity |
0-95%RH |
|
Explosion-proof |
Ex d IIC T6 Gb |
Degree of protection |
IP65 |
|
Alarm |
Sound, light |
Operating time |
24H |
|
Dimensions |
286*202*96mm (H x W x D) |
Weight |
3.4kg (3.8kg with alarm light) |
FAQ
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.