Technical parameter of radiator copper and aluminum separating machine 

Features of Copper and Aluminum Separating Machine

1. After the copper and aluminum separated, the copper pipes are not damaged and almost no copper loss.
2. This machine can separate one layer of radiators or two-layer of radiators.
3. Each set of this machine can separate three kinds of copper pipe center distances, namely 25mm, 21mm and 19mm. (It also can be customized according to your copper pipe center distance.)
4. Easy operation, high efficiency and labor-saving.
5. Drying separating process and no crushing is needed.

Application of radiator copper and aluminum separating machine

Various water tanks, convection radiators, steel radiators, aluminum radiators, copper radiators, stainless steel radiators, copper-aluminum composite radiators, etc., as well as the original cast iron radiators.

Attention 

1) This TMS-016 radiator copper and aluminum separating machine can process the radiators which is flat and non-deformed .
2) The diameter centerline of the copper pipes in level need to be 19mm or 21mm or 25 mm , if your radiator is other size , we also can customized for you .
3) This machine only can process radiator fins with single layer or double layer . If your radiator is multiple layers , you need to cut the radiators by band saw machine firstly . Then it can be processed by this radiator copper and aluminum separating machine .

FAQ of radiator copper and aluminum separating machine 

1. Is there quick wear part on the machine?

The spare part of the machine is blades, their use life is more than 2 years, and we could also supply blade sharping machine to you for maintenance.

2. What’s the lognest continuous working time for the recycling machine?

Whole day.

3. Is the machine easy to operate? How many workers required to operate it?

We design precise but simple control system for the machine. One or two worker is required.