1.5mm-25mm Manual Wire Stripper Machine Peeling Aluminum Alloy

Description of manual wire stripping machine

It’s easy to operate with hand crank or drill driven, portable and convenient, energy saving, nice appearance; u can get copper wire after the single blades stripping,

Technical datas of manual wire stripping machine

Features of manual wire stripping machine

1. Light weight can be easily movement and carry to any places.

2. Cost effective machine and suitable for industory and personal usage.
3. Working by adjust the diameter of holes.

1. Plastic regulating nut

2. Blades regulating nut

3. Hand crank

4. Feeding panel

5. Blades fixed screw

6. Feeding hole

7. Drill operated rod

8. Shaft

9. Blades

Manual of wire stripping machine

1. adjust distance between blades and shaft in accordance with the cable size(the insulating layer stripped but not hurt the inner conductor)

2. feeding: strip the cables through feeding hole( u can adjust the feeding hole according cable size to the proper position which cables can enter into but not swing).

3. stripping: (hand operated) rotate hand crank in order to peeling, if can’t peel:

(1). too small wire diameter

(2). the blades center not in line with groove center( adjust the blades core)

(3). blades edge is too dull( sharpen the blades)

Drill driven of manual wire stripping machine

if u want drill driven in operation, pull down the hand crank first, then install the drill driven rod with drill, u can begin to strip the cables).

Notice: don’t input your hands into the machine in any circumstance.